
Reinforcement set made of laser-cut sheet steel for the rear swingarm of your Puch Maxi N moped / moped.
The sheets are bent at the marked points and adapted to the frame contour. The Siggnature logo is engraved on the inside.
The sheet metal is then welded to the frame.
We recommend treating the space in between with cavity sealant or sealing it with silicone.
Material: Steel, raw
Thickness: 3.0 mm
A kick-ass custom product straight from the Siggnature workshop.
Manufacturer: Siggnature · Material: Steel · Surface: raw · Color: silver · Total length: 390 mm · Height: 345 mm · Thickness: 3 mm · Mounting type: Weld
Manufacturer: Siggnature · Material: Steel · Surface: raw · Color: silver · Total length: 380 mm · Height: 345 mm · Thickness: 3 mm · Mounting type: Weld
| Puch | E50 |
Accessories & related products
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: Outer edge · Ø External head: 14 mm · Width across flats: 13 mm · Width across flats: 17 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Total length: 32 mm · Thread length: 13 mm · Number of components: 3 pcs
CHF 12.90
OWATROL Rustol CIP Primer Rust Sealer 750 ml
Manufacturer: OWATROL · Area of application: Chemistry · Area of application: Paint & varnish · Contents: 750 ml · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Signal word: Attention
CHF 49.90
CHF 66.53/l
Explore categories from Shock absorber & swingarm
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: angular · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts · Wheel size: 17 "
CHF 34.90
swiing® revival brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: Outer edge · Ø External head: 14 mm · Width across flats: 13 mm · Width across flats: 17 mm · Shank: Yes · Ø shaft: 9.8 mm · Shank length: 9.5 mm · Total length: 32 mm · Thread length: 13 mm · Number of components: 3 pcs
CHF 12.90
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
CHF 9.90








