Selettra Zünd coil suitable for ignition type NO2019, for left- and right-turning engines with Ø 90 mm ignition plate mount.
The ignition box can be mounted on various mopeds, mopeds and small motorcycles such as Puch Maxi S / N, Puch X30 Sport NS / NL, Puch X30 NG-2AH, Puch X30 Velux, Sachs 503, Sachs 50/2, Zündapp Belmondo, Kreidler etc.
Type number: 034-IG-14
Fits system: NO2019 (adjustment angle 3°)
Direction of rotation: Left & Right
Connection for light: No
Plug type: Superseal
Basic setting of the ignition: Set the crankshaft to 15 - 20° before TDC (top dead center), the markings must then match.
Corresponding attachments such as stator, rotor, complete ignitions, adjustment tools, additional weights etc. can be found in the accessories section.
Quality product from the Italian manufacturer Selettra.
| Manufacturer | Selettra |
| Place of use | External (outside the ignition) |
| Ø cable holder | 7 mm |
| Color | red |
| Ø mounting hole | 6.5 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Screws |
| Area of application | Performance |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Accessories & related products
swiing® ingenious screw M6x25 special drive pinion pull rope starter PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: Hexagon socket · Screw head: Countersunk head · Width across flats: 4 mm · Strength class: 10.9 · Total length: 25 mm
CHF 2.90
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Number of fixing points: 3 pcs · Thickness: 4 mm · Ø outside: 65 mm · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 131 g
CHF 19.30
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Number of fixing points: 4 pcs · Thickness: 9 mm · Ø outside: 65 mm · Ø mounting hole: 6 mm · Ø inside: 24.5 mm · Ø bolt circle: 50 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Weight: 110 g
CHF 36.50
Moped fans also bought
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Area of application: Tuning
CHF 64.90
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs · Area of application: Standard
CHF 2.40
swiing® revival 38 mm gasket set tuning cylinder | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 2 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Hole spacing inlet: 38 mm · Area of application: Standard
CHF 9.90
Not in stock
GPO secondary nozzle PHBG (size 30 - 62.5) of your choice
Manufacturer: GPO · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: PHBG AD · Carburetor type: PHBG AS · Carburetor type: PHBG BD · Carburetor type: PHBG CS · Carburetor type: PHBG DS · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 30 · Nozzle size: 32 · Nozzle size: 35 · Nozzle size: 37 · Nozzle size: 38 · Nozzle size: 40 · Nozzle size: 42 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 60 · Nozzle size: 62.5 · Total length: 9.5 mm · Drive: Slot
CHF 3.50
Working late? Evening hours on Thursday until 20:00
