Safety data sheet DE 
A revolution in rust protection from the world of boatbuilding!
Do you own a rare classic car with a beautiful patina, and want to preserve its paint from deterioration for decades to come? Then this product is perfect for you.
As a preparatory step, treat the surface to be coated with 1–2 coats of Rustol OWATROL Rust and Paint Sealer.
Afterward, apply several coats of Deks Olje over the rust sealer; it will fully cure in 5–7 days and become abrasion-resistant.
This transparent sealer has the following properties:
- It forms a flexible film that does not crack, become brittle, or peel.
- High-gloss finish
- Highly transparent oil-based varnish
- Provides long-lasting protection
- No sanding required between coats
Application:
- Apply 3–6 coats at intervals of at least 12 hours at 20°C.
- Do not sand between coats.
- Allow to dry for at least 3–4 days before the object is put back into use.
- Immediately remove any drips or runs during application. Dried D2 is very difficult to remove completely.
The oil has extremely low surface tension, is three times “wetter” than water, and can therefore be applied when warmed (approx. 35°C) using a standard flow-cup or suction-cup spray gun.
This unique rust inhibitor and sealant is the ideal choice for providing long-term protection against rust on your classic car and preserving its natural finish.
You’ll find brushes for application, as well as other rust and paint protectants in spray cans, in the accessories section.
A quality product from the Spanish manufacturer OWATROL.
| Manufacturer | OWATROL |
Accessories & related products
OWATROL Polytrol Gloss Refresher 500 ml
Manufacturer: OWATROL · Area of application: Chemistry · Area of application: Paint & varnish · Contents: 500 ml · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: Repeated contact can lead to chapped or cracked skin.
CHF 31.90
CHF 63.80/l
Explore categories from Paints & varnishes
Moped fans also bought
swiing® revival oil filler plug with sealing ring | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Slot · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Thread type: M10x1.5 (standard thread) · Number of components: 2 pcs · Nominal diameter (thread): 10 mm · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
CHF 3.90
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Total length: 106 mm · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
CHF 7.40
OWATROL Rustol CIP Primer Rust Sealer 750 ml
Manufacturer: OWATROL · Area of application: Chemistry · Area of application: Paint & varnish · Contents: 750 ml · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Signal word: Attention
CHF 49.90
CHF 66.53/l
OWATROL Polytrol Gloss Refresher 500 ml
Manufacturer: OWATROL · Area of application: Chemistry · Area of application: Paint & varnish · Contents: 500 ml · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: Repeated contact can lead to chapped or cracked skin.
CHF 31.90
CHF 63.80/l
Working late? Evening hours on Thursday until 20:00
