
39.0 mm piston with a 1.5 mm rectangular piston ring featuring flank retention (FS) for Puch Supermaxi LG1 & LG2 mopeds with catalytic converters.
You can find the detailed piston dimensions, as shown in the technical drawing, in the product details. You can also find information about common piston rings, their contact surfaces, and retaining methods in the legend accompanying the images.
The second-oversize piston is used for bored and honed cylinders.
The piston kit includes a piston pin, piston clips, and piston rings.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the necessary installation tools, piston rings, piston pin retainers, etc., in the accessories section.
A quality product from the Italian manufacturer Meteor.
| Manufacturer | Meteor |
| Ø outside piston (A) | 39 mm |
| Compression height (C) | 24 mm |
| Curvature (D) | 2.3 mm |
| Total piston height (E) | 55.3 mm |
| Number of piston rings (F) | 1 pcs |
| Nominal diameter | 39 mm |
| Piston ring mold | Rectangular ring |
| Ø piston pin (B) | 12 mm |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 1.5 mm |
| Weight piston kit | 86 g |
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats: 10 mm · Width across flats: 17 mm
CHF 19.90
Explore categories from Piston
Moped fans also bought
Rectangular rear light (ULO replica) Budget
Test mark: none · Ø Receptacle: 3.5 mm · Material: Plastic · Color: black · Color: red · Bulb holder: BA9s · Width: 65 mm · Depth: 55 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 1 pcs · Puch OEM number: 321.1.55.100.0 · Pony OEM number: P777
CHF 9.50
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: blue · Total length: 28 mm · Area of application: Tuning · Number of components: 3 pcs
CHF 17.90
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Surface: blackened · Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
CHF 9.90
GPO Gear Ring 45 T, Black | Puch Maxi, X30 NG-2AH
Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Color: black · Material: Steel · Number of teeth: 45 pcs · Ø mounting hole: 6.7 mm · Thickness: 4.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs
CHF 24.90
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
CHF 9.90
GPO 38 mm gasket cylinder head 0.2 mm | Puch
Manufacturer: GPO · Material: Aluminum · Place of use: Cylinder head · Thickness: 0.2 mm · Ø cylinder: 38 mm · Ø screw holder: 7 mm · Area of application: Original · Area of application: Standard · Alternative version of the Puch OEM number: 349.1.10.004.1
CHF 2.50









