Drain nipple for automatic intake E50 engines of Puch Maxi S and N mopeds/mopeds.
Drainage of the clutch cover is usually prescribed in racing. An oil-resistant fuel hose can also be fitted to the bleeding nipple with an outer diameter of 6 mm.
The engine must be equipped with a pull starter, as the starting mechanism can no longer be installed.
A selection of oil lines, pull starters and other add-on parts such as fastening screws, sealant, gasket, oil filler screw, etc. can be found in the accessories section.
Picture 3 & 4 serves to illustrate the assembly, the clutch cover is not included in the scope of delivery.
Details
Manufacturer | MBR |
Material | Aluminum |
Suitable for the following models
Puch | E50 |
Accessories & related products
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Total length: 170 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
CHF 149.90
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Total length: 160 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
CHF 149.90
swiing® revival screw set for clutch cover Inox | E50
Manufacturer: swiing® revival parts · Material: Chrome steel (stainless steel) · Surface: blank · Thread type: M6x1 (standard thread) · Drive: Slot · Screw head: Countersunk head · Screw head: Lens head · Number of components: 4 pcs · Puch spare part no.: 900.9460
CHF 7.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Number of components: 1 pcs · Alternative version of the Puch spare part no.: 349.1.10.349.1
CHF 2.90
Not in stock
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black · Surface: chrome-plated · Surface: raw · Ignition system: HPI · Width: 135 mm · Height: 93 mm · Total length: 160 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm
CHF 149.90
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Width: 150 mm · Height: 82 mm · Total length: 170 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
CHF 149.90
Not in stock
Moped fans like you also bought:
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Surface: blue galvanized · Thread type: M10x1.5 (standard thread) · Drive: Slot · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Thread length: 6 mm · Number of components: 2 pcs · Puch spare part no.: 364.1.10.660.1
CHF 3.50
Not in stock
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm · Number of components: 2 pcs
CHF 2.00
Motorex Automatic Motor Oil (ATF) 450 ml
Manufacturer: Motorex · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Temperature resistance (min.): -45 - 200 °C · Area of application: Gearbox lubrication with clutch · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
CHF 9.90
CHF 22.00/l
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Total length: 170 mm · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm
CHF 149.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Thickness: 1 mm · Number of fixing points: 4 pcs · Ø inside: 106 mm · Number of components: 1 pcs · Alternative version of the Puch spare part no.: 349.1.10.349.1
CHF 3.90
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Height: 8.9 mm · Drive: External hexagon · Ø outside: 18.8 mm · Width across flats SW: 14 mm · Area of application: Standard · Pony spare part no.: A4513 · Sachs spare part no.: 0942 072 102
CHF 2.40
GPO cylinder stud bolt set special M6x106 mm galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: blue galvanized · Diameter: 7 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 106 mm · Width across flats SW: 10 mm · Thread length: 15 mm · Thread length: 19 mm · Strength class: 10 · Strength class: 10.9 · Alternative version of the Puch spare part no.: 360.1.10.034.1
CHF 19.80