Worn gearbox cover with bleed port for single-speed automatic E50 engines of Puch Maxi S and N mopeds / mopeds.
Since this racing clutch cover does not have a clutch lever, the use of a cable starter is necessary.
The release of the clutch cover is usually mandatory in racing. An oil-resistant fuel hose can also be fitted to the 6 mm outer diameter bleed port.
A selection of oil lines, pull starters and other attachments such as fastening screws, sealant, gasket, oil filler screw etc. can be found in the accessories section.
| Manufacturer | MBR |
| Material | Aluminum |
| Number of fixing points | 4 pcs |
| Alternative version of the Puch OEM number | 349.5.10.335.1 |
| Puch | E50 |
Accessories & related products
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Surface: chrome-plated · Surface: raw · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Ø outside: 130 mm · Total length: 170 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
CHF 149.90
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Surface: chrome-plated · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Ø outside: 130 mm · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Color: Chrome · Color: black-matt · Total length: 160 mm · Hole spacing: 137.5 mm · Number of fixing points: 2 pcs
CHF 149.90
Not in stock
swiing® revival screw set for clutch cover Inox | E50
Surface: blank · Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Number of components: 4 pcs · Screw head: Countersunk head · Screw head: Lens head · Thread type: M6x1 (standard thread) · Drive: Slot · Puch OEM number: 900.9460
CHF 7.90
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 0.5 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 2.90
swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50
Surface: chrome-plated · Surface: raw · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Ø outside: 130 mm · Ignition system: HPI · Width: 135 mm · Height: 93 mm · Color: Chrome · Color: black · Total length: 160 mm · Hole spacing: 137.5 mm · Number of fixing points: 2 pcs
CHF 149.90
swiing® ingenious pull starter | Puch E50 MVT ignition
Surface: chrome-plated · Surface: raw · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Ø outside: 130 mm · Ignition system: MVT Allumage · Width: 150 mm · Height: 82 mm · Color: Chrome · Color: black-matt · Total length: 170 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
CHF 149.90
Not in stock
Moped fans also bought
Oil filler plug with sealing ring | Puch Maxi
Material: Steel · Thread type: M10x1.5 (standard thread) · Number of components: 2 pcs · Total length: 14.6 mm · Screw head: Lens head · Surface: galvanized (blue) · Ø External head: 14 mm · Drive: Slot · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
CHF 3.50
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Surface: galvanized (blue) · Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Color: silver · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Total length: 18 mm · Thread length: 12 mm · Puch OEM number: 901.1053
CHF 3.50
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 0.5 mm · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
CHF 2.90
swiing® revival stud bolt set M6x30 (strength 10.9) galvanized
Manufacturer: swiing® revival parts · Strength class: 8 · Strength class: 10.9 · Material: Steel · Thread type: M6x1 (standard thread) · Diameter: 6 mm · Width across flats SW: 10 mm · Total length: 30 mm · Surface: galvanized (blue) · Drive: External hexagon · Thread length: 12 mm
CHF 10.70
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Manufacturer: swiing® revival parts · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Area of application: Standard · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 22 mm · Ø outside: 24 mm
CHF 38.90
Collection only possible with online purchase and appointment.
