Hot 
Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi S, N and X30 Velux (except Ur-Velux) moped / moped.
The wheel hub is from new production.
The brake anchor plate was produced again in a small series using the old casting tools and therefore corresponds to the original from times gone by.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with deep groove ball bearings and an M11 axle.
The 36 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing them with a high-quality alternative from the accessories range.
| Manufacturer | LELEU |
| Material | Aluminum |
| Ø drum | 80 mm |
| Area of application | Original |
| Thread type | MF11x1 (fine pitch thread) |
| Ø axle | 11 mm |
| Axle length | 160 mm |
| Ø outside | 115 mm |
| Number of spoke holes | 36 pcs |
| Ø spoke hole | 3.7 mm |
| Puch |
Ratings
Accessories & related products
LELEU wheel hub spoke wheel front 28 holes with anchor plate & axle | Puch Maxi N, X30 Chopper
Manufacturer: LELEU · Material: Aluminum · Ø drum: 80 mm · Ø inside: 80 mm · Thread type: MF10x1 (fine pitch thread) · Ø outside: 115 mm · Ø axle: 11 mm · Ø bolt circle: 105 mm · Axle length: 160 mm · Number of spoke holes: 28 pcs · Ø spoke hole: 3.7 mm · Area of application: Original
CHF 159.90
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Material: Aluminum · Ø drum: 80 mm · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Ø outside: 115 mm · Width: 105 mm · Total length: 185 mm · Color: silver · Ø axle: 12 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Area of application: Standard · Puch OEM number: 349.5.41.803.1
CHF 94.90
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 9.90
CHF 22.00/l
GPO 17" spoke set incl. nipple (2.9 x 188 mm) Inox
Nipple length: 14 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Surface: raw · Quantity: 36 pcs · Length from hook: 188 mm · Color: silver · Ø spoke head: 5.35 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 7.9 mm · Ø Nipple neck: 5 mm · Hook length: 9 mm · Thread length: 11 mm · Hook angle: 95 °
CHF 54.90
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Width: 50 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
CHF 79.90
Collection only possible with online purchase and appointment.
