Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi N chopper as well as X30 chopper moped / moped with 14" rim.
The brake anchor plate was manufactured in a small series with the old casting tools and therefore corresponds to the original from the past.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with grooved ball bearings and an M11 axle.
The 28 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing these with a high-quality alternative such as those in the accessories section.
| Manufacturer | LELEU |
| Material | Aluminum |
| Area of application | Original |
| Ø drum | 80 mm |
| Ø inside | 80 mm |
| Ø outside | 115 mm |
| Axle length | 160 mm |
| Ø bolt circle | 105 mm |
| Ø axle | 11 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Number of spoke holes | 28 pcs |
| Ø spoke hole | 3.7 mm |
| Puch |
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Area of application: Special tool · Number of components: 3 pcs · Ø outside: 10 mm · Total length: 41.1 - 65 mm · Thread length: 30 mm · Thread type: M6x1 (standard thread) · Width across flats: 8 mm
CHF 16.50
Hot 
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Ø outside: 115 mm · Manufacturer: LELEU · Ø axle: 11 mm · Material: Aluminum · Ø drum: 80 mm · Axle length: 160 mm · Thread type: MF11x1 (fine pitch thread) · Area of application: Original · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm
CHF 159.90
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Width: 105 mm · Ø outside: 115 mm · Ø axle: 12 mm · Material: Aluminum · Color: silver · Ø drum: 80 mm · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Area of application: Standard · Total length: 185 mm · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Puch OEM number: 349.5.41.803.1
CHF 94.90
Explore categories from Hub & axle
Moped fans also bought
Side stand chrome | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Adjustable: Yes · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs · Total length: 345 mm · Color: Chrome · Color: black
CHF 19.50
GPO 19" spoke set incl. nipple (2.9 x 212 mm) Inox
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Quantity: 36 pcs · Surface: raw · Color: silver · Nominal diameter (thread): 3.15 mm · Length from hook: 212 mm · Ø spoke: 2.9 mm · Ø spoke head: 5.35 mm · Nipple length: 14 mm · Ø nipple head: 8.1 mm · Ø Nipple neck: 5 mm · Hook length: 9.8 mm · Thread length: 11 mm · Hook angle: 95 °
CHF 59.90
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Ø inside: 2.5 mm · Ø outside: 8 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Total length: 25 mm · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
CHF 3.90
MMB Speedometer Drive, 19", Right-Hand, 10 mm Shaft (for VDO Speedometer Cable) NOS | Puch X30 Velux
Ø outside: 41 mm · Manufacturer: MMB Instrumente · Ø axle: 10 mm · Material: Aluminum · Place of use: right · Thread type: MF10x1 (fine pitch thread) · Wheel size: 19 " · 4-edge speedometer cable: 2.6 mm · Ø mounting hole: 10 mm
CHF 58.90
Working late? Evening hours on Thursday until 20:00
