Hot 
Complete LELEU brake plate suitable for the front wheel on Puch Maxi S & N, X30 Sport NS, NL & NG, Velux X30 moped / moped as well as some Peugeot models with 12 mm wheel axle.
The support plate is suitable for LELEU cast rims and wire spoke wheels.
The brake anchor plate was reproduced in a small series with the old casting tools and thus corresponds to the original from times gone by.
In addition, the anchor plate was equipped with high-quality NewFren brake pads.
An alternative brake plate for 11 mm axles and a matching wheel hub can be found in the accessories section.
Quality product from the French manufacturer LELEU.
Original Puch spare part number: 349.1.40.007.2 / 349.1.40.807.9
| Manufacturer | LELEU |
| Ø drum | 80 mm |
| Ø axle | 12 mm |
| Ø bore | 12.1 mm |
| Material | Aluminum |
| Puch OEM number | 349.1.40.007.2, 349.1.40.807.9 |
| Puch |
Accessories & related products
GPO brake anchor plate front 11 mm axle (1A quality) | Puch Maxi S, N / X30 Sport NS, NL / Velux
Manufacturer: GPO · Material: Aluminum · Thread size: M6 · Ø External brake pads: 80 mm · Ø axle: 11 mm · Ø bore: 11.3 mm · Wide cam holder: 12 mm · Ø outside: 95 mm · Brake lever length (lever length): 78 mm
CHF 59.90
Not in stock
Hot
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Manufacturer: LELEU · Thread type: MF11x1 (fine pitch thread) · Ø drum: 80 mm · Material: Aluminum · Ø axle: 11 mm · Axle length: 160 mm · Ø outside: 115 mm · Area of application: Original · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm
CHF 159.90
Explore categories from Hub & axle
Moped fans also bought
Hot
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Thread length: 26 mm · Thread length: 52.5 mm · Total length: 185 mm · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Width across flats: 19 mm
CHF 14.90
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: gray · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 6 mm · Thread length: 22 mm · Shank: No · Number of components: 24 pcs · Width across flats: 10 mm
CHF 12.90
GPO cast wheel hub front | Puch Maxi, X30 NG-2AH
Manufacturer: GPO · Material: Aluminum · Ø drum: 80 mm · Ø Receptacle: 92 mm · Thread type: M8x1.25 (standard thread) · Ø axle: 12 mm · Number of fixing points: 5 pcs · Thread length: 14 mm · Width: 54.5 mm · Ø bolt circle: 106 mm · Wheel size: 17 " · Ø outside: 118 mm · Puch OEM number: 321.1.40.203.2
CHF 57.90
Cable sleeve, Ø 5 x 2.2 mm, black (6-meter roll)
Ø cable: 2.2 mm · Coating: none · Manufacturer: Made in Italy · Ordering unit: Roll 6 meter · Material: Plastic · Area of application: Standard · Material: Steel · Color: black · Total length: 6000 mm · Ø inside: 2.5 mm · Ø outside: 5 mm
CHF 11.90
CHF 1.98/m
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
CHF 9.90
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Material: Steel · Ø External brake pads: 80 mm · Ø axle: 12 mm · Total length: 187 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Wide cam holder: 12 mm · Ø outside: 91 mm · Brake lever length (lever length): 55 mm · Cranking (offset): 8 mm · Ø screw holder: 6.5 mm
CHF 69.90
Not in stock
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø axle: 12 mm · Brake lever length (lever length): 68 mm · Ø bore: 12.2 mm · Total length: 135 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Cranking (offset): 10 mm · Ø outside: 92 mm · Ø screw holder: 6.5 mm
CHF 74.90
swiing® revival wheel axle set M12x1 x 165 mm cast & spoke hub | Puch
Manufacturer: swiing® revival parts · Thread type: MF12x1 (fine pitch thread) · Surface: galvanized (blue) · Diameter: 12 mm · Material: Steel · Thread length: 40 mm · Thread length: 50 mm · Total length: 165 mm · Ø shaft: 11.95 mm · Width across flats: 19 mm · Shank length: 75 mm
CHF 29.90
Working late? Evening hours on Thursday until 20:00
