For the economical repair of damaged or worn threads (of all materials) and as a design element for thread reinforcement when using materials with low shear strength (e.g. aluminum, aluminum-magnesium alloys). The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.
Execution:
High-strength, free-running HeliCoil®plus thread inserts made of stainless steel with high wear resistance, low thread friction in tight tolerances, high surface quality as well as corrosion resistance and heat resistance. The flexible design enables even load and stress distribution and thus produces durable screw connections of the highest quality for all operating loads (static, dynamic) with ideal force transmission. Uncomplicated, quick assembly, creates an internal thread that is true to gauge and can be used on both sides.
Complete repair kit for M8 thread sizes in a plastic case.
Application:
1. Drill out the defective thread with the enclosed drill.
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread using the installation tool.
5. Remove the tang with the tang breaker
Scope of delivery
- 1 pc. twist drill Ø8.4 mm
- 1 pc. Thread cutter
- 1 pc. Installation tool
- 1 pc. Stud breaker
- 10 pcs. HeliCoil thread insert (1×D)
- 10 pcs. HeliCoil threaded insert (1.5×D)
- 10 pcs. HeliCoil threaded insert (2×D)
- 1 pc. Plastic case 180×165×45 mm (L×B×H)
Note
Adetailed instruction is included.
Original HeliCoil product from the German manufacturer Böllhoff.
| Storage method | Suitcase |
| Manufacturer | HeliCoil |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | coated |
| Number of components | 30 pcs |
| Thread type | M8x1.25 (standard thread) |
| Total length | 8 mm, 12 mm, 16 mm |
| Nominal diameter (thread) | 8 mm |
| Dimension thread insert | 1D, 1.5D, 2D |
| Ø bore | 8.4 mm |
| Storage box dimension [mm] | 180 x 165 x 45 mm |
| Area of application | Workshop accessories |
Ratings
Accessories & related products
Amecoil insert M8 (1.5D) 12 mm Inox
Manufacturer: Amecoil · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 9 mm · Nominal diameter (thread): 10 mm · Total length: 5 mm · Total length: 6 mm · Total length: 7 mm · Total length: 9 mm · Total length: 10 mm · Total length: 12 mm · Thread size: M10 · Thread size: M6 · Thread size: M7 · Thread size: M8
CHF 0.90
Explore categories from Screws & fastener sets
Moped fans also bought
swiing® revival oil filler plug with sealing ring | Puch E50
Drive: Slot · Screw head: Lens head · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 2 pcs · Thread type: M10x1.5 (standard thread) · Thread length: 6 mm · Total length: 14.6 mm · Ø External head: 14 mm · Puch OEM number: 364.1.10.660.1
CHF 3.50
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Drive: External hexagon · Drive: Slot · Total length: 18 mm · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Width across flats Screw: 13 mm · Puch OEM number: 901.1053
CHF 3.50
GPO pedal crank right chrome (original Puch)
Manufacturer: GPO · Material: Steel · Color: Chrome · Surface: chrome-plated · Thread type: FG14.3 (9/16" 20G) · Crank length (center-center): 156 mm · Ø Pedal wedge: 9.5 mm · Ø Pedal axle: 16 mm · Total length: 181 mm · Cranking (offset): 52 mm
CHF 46.50
HeliCoil thread repair set M10 (professional tool)
Storage method: Suitcase · Manufacturer: HeliCoil · Material: Chrome steel (colloquially known as stainless steel) · Number of components: 30 pcs · Thread type: M10x1.5 (standard thread) · Total length: 10 mm · Total length: 15 mm · Total length: 20 mm · Nominal diameter (thread): 10 mm · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Ø bore: 10.5 mm · Storage box dimension [mm]: 180 x 165 x 45 mm · Area of application: Workshop accessories
CHF 87.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
