For the economical repair of damaged or worn threads (of all materials) and as a design element for thread reinforcement when using materials with low shear strength (e.g. aluminum, aluminum-magnesium alloys). The use of wear-free HeliCoil thread inserts not only repairs the thread but also increases the thread load-bearing capacity.
Execution:
High-strength, free-running HeliCoil®plus thread inserts made of stainless steel with high wear resistance, low thread friction in tight tolerances, high surface strength as well as corrosion resistance and heat resistance. The flexible design enables even load and stress distribution and thus produces durable screw connections of the highest quality for all operating loads (static, dynamic) with ideal force transmission. Uncomplicated, quick assembly, creates an internal thread that is true to gauge and can be used on both sides.
Complete repair kit for M10 thread sizes in a plastic case.
Application:
1. Drill out the defective thread with the enclosed drill.
2. Check the tap and threaded bolt.
3. Cut the holding thread with the special HeliCoil tap.
4. Turn the thread insert into the holding thread using the installation tool.
5. Remove the tang with the tang breaker
Scope of delivery
- 1 pc. twist drill Ø10.5 mm
- 1 pc. Thread cutter
- 1 pc. Installation tool
- 1 pc. Tang breaker
- 10 pcs. HeliCoil thread insert (1×D)
- 10 pcs. HeliCoil threaded insert (1.5×D)
- 10 pcs. HeliCoil threaded insert (2×D)
- 1 pc. Plastic case 180×165×45 mm (L×B×H)
Note
Adetailed instruction is included.
Original HeliCoil product from the German manufacturer Böllhoff.
Details
| Storage method | Suitcase |
| Manufacturer | HeliCoil |
| Material | Chrome steel (known as Nirosta®) |
| Number of components | 30 pcs |
| Dimension thread insert | 1D, 1.5D, 2D |
| Total length | 10 mm, 15 mm, 20 mm |
| Ø bore | 10.5 mm |
| Nominal diameter (thread) | 10 mm |
| Thread type | M10x1.5 (standard thread) |
| Dimension storage box | 180 x 165 x 45 mm |
| Area of application | Workshop accessories |
Accessories & related products
Amecoil insert M10 (1D) 10 mm Inox
Manufacturer: Amecoil · Material: Chrome steel (known as Nirosta®) · Total length: 5 mm · Total length: 6 mm · Total length: 7 mm · Total length: 9 mm · Total length: 10 mm · Total length: 12 mm · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Nominal diameter (thread): 7 mm · Nominal diameter (thread): 8 mm · Nominal diameter (thread): 9 mm · Nominal diameter (thread): 10 mm · Thread size: M10 · Thread size: M6 · Thread size: M7 · Thread size: M8
CHF 0.90
Moped fans like you also bought:
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Material: Copper · Material: Steel · Surface: galvanized (blue) · Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Thread length: 12 mm · Color: silver · Total length: 18 mm · Thread type: M8x1.25 (standard thread) · Puch OEM number: 901.1053
CHF 3.50
Hot 
swiing® ingenious "Expert" motor stand
Surface: varnished · Manufacturer: swiing® ingenious parts · Material: Steel · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Total length: 370 mm · Hole spacing: 21.5 mm · Color: red · Color: white · Material thickness: 3.5 mm · Area of application: Motor bracket · Width: 245 mm · Height: 340 mm
CHF 74.90
HeliCoil thread repair set M8 (professional tool)
Storage method: Suitcase · Manufacturer: HeliCoil · Material: Chrome steel (known as Nirosta®) · Surface: coated · Number of components: 30 pcs · Dimension thread insert: 1D · Dimension thread insert: 1.5D · Dimension thread insert: 2D · Total length: 8 mm · Total length: 12 mm · Total length: 16 mm · Ø bore: 8.4 mm · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread) · Dimension storage box: 180 x 165 x 45 mm · Area of application: Workshop accessories
CHF 79.90
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing · Tension: 12 V · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Performance: 65 W · Area of application: Tuning · Number of fixing points: 2 pcs · Mounting type: Screws · Weight: 268 g
CHF 364.90
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs · Ø outside: 130 mm
CHF 149.90
Hot
MLM exhaust "Crazy Pipe" black straight outlet | Puch
Manufacturer: MLM · Material: Steel · Surface: varnished · Color: black · Total length: 945 mm · Mounting type: Nuts & bolts · Ø Silencer: 45 mm · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 3 pcs · Exhaust type: Cone / double cone · Ø Internal connection: 22 mm · Ø outside: 91 mm
CHF 344.90
Not in stock
Collection only possible with online purchase and appointment.
