
Original float chamber gasket for the Gurtner AR (AR2) carburetor of your MBK, Motobécane moped / moped.
The chamber seal made of sealing paper is of high quality and fits perfectly.
French quality product from the manufacturer Gurtner in original equipment quality.
| Thickness | 0.4 mm |
| Manufacturer | Gurtner |
| Material | Sealing paper |
| Component group Carburetor | Sealing, revising |
| MBK / Motobécane |
Accessories & related products
Gurtner carburetor AR 2/12 original | MBK / Motobécane (AV7)
Nominal diameter: 12 mm · Manufacturer: Gurtner · Material: Aluminum · Component group Carburetor: Carburetor complete · Choke control: Cable choke · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 19 mm · Nozzle size: 54 · Ø Inside entrance: 12 mm · Width: 80 mm · Ø Output inside: 12 mm · Height: 101 mm · Mounting type: Plug connection clamped · Ø Internal connection: 17 mm · Total length: 50 mm · Area of application: Original · Area of application: Standard
CHF 79.90
Not in stock
Gurtner carburetor AR 2/10 original | MBK / Motobécane 4/85 (AV71)
Nominal diameter: 10 mm · Manufacturer: Gurtner · Material: Aluminum · Component group Carburetor: Carburetor complete · Choke control: Cable choke · Ø fuel hose connection: 6 mm · Ø without reducing sleeve: 19 mm · Nozzle size: 52 · Ø Inside entrance: 10 mm · Width: 80 mm · Ø Output inside: 10 mm · Height: 101 mm · Mounting type: Plug connection clamped · Ø Internal connection: 16 mm · Total length: 50 mm · Area of application: Original · Area of application: Standard
CHF 79.90
Gurtner fuel filter carburetor AR2 / DG | Peugeot 102, 103, MBK, Motobécane
Manufacturer: Gurtner · Material: Plastic · Component group Carburetor: Adjusting screws, float, etc. · Color: white · Carburetor type: Gurtner AR · Carburetor type: Gurtner DG · Ø outside: 8 mm · Total length: 29 mm
CHF 9.80
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain type: 415H · Thickness: 4.5 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Chain pitch: 1/2" x 3/16" · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Ø bolt circle: 105.5 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Number of fixing points: 6 pcs
CHF 19.90
GPO tail light ULO | Puch Maxi N, S old version
Manufacturer: GPO · Bulb holder: BA15s · Color: black · Color: red · Material: Plastic · Tension: 6 V · Test mark: none · Ø Receptacle: 4 mm · Width: 60 mm · Height: 110 mm · Number of fixing points: 2 pcs · Brake light: No · Reflectors: Yes · Battery operated: No · Depth: 80 mm · Mounting type: Nuts & bolts
CHF 36.50
Not in stock
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Manufacturer: swiing® revival parts · Ø outside: 11.8 mm · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Width across flats: 19 mm · Total length: 185 mm · Ø shaft: 11.9 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm
CHF 14.90
SKF 6001 2RSH Ball bearing 12/28/8
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 8 mm · Manufacturer: SKF · Dust protection type: 2RSH - NBR contact seal on both sides · Bearing clearance: CN (standard) · Ø inside: 12 mm · Stock number: 6001 · Bearing type: Deep groove ball bearing · Ø outside: 28 mm · Ball bearing closed: Yes · Width: 8 mm
CHF 12.90
Gurtner O-ring fuel connection carburetor AR2 | MBK, Motobécane (AV7)
Manufacturer: Gurtner · Place of use: Carburetor · Material: Rubber · Color: black · Ø inside: 21 mm · Ø outside: 24 mm · Cord thickness: 1.5 mm · Number of components: 1 pcs · Area of application: Original · Area of application: Standard
CHF 2.90
Gurtner O-ring fuel connection carburetor AR1 | MBK, Motobécane (AV10)
Manufacturer: Gurtner · Place of use: Carburetor · Material: Rubber · Color: black · Ø inside: 24 mm · Ø outside: 26 mm · Cord thickness: 1 mm · Number of components: 1 pcs · Area of application: Original · Area of application: Standard
CHF 2.90








