Converter unit suitable for your Piaggio Ciao, Si, Bravo and Boxer moped / moped with variomatic transmission.
High-quality shaft seals (colloquially known as oil seals), correctly installed shim washers, lubricated needle bearings and a concentricity test characterize this torque converter clutch.
Notes: For installation on a Piaggio Ciao, the pulleys must be turned down to approx. 96 mm or the frame must be ground out a little.
The required belt length in combination with a racing vario is 950 mm (rear engine position) to 975 mm (front engine position) for the Ciao. For Piaggio Si models it is 1134 mm to 1150 mm.
The installed counter-pressure spring corresponds to the original in terms of spring force. For a higher starting speed, you can replace this with a higher version as required. When fitting, make sure that the spring tab does not protrude too far into the pulley and could damage the belt.
| Manufacturer | GPO |
| Gearbox type | Vario |
| Number of springs | 3 pcs |
| Number of jaws | 3 pcs |
| Thickness | 74 mm |
| Ø inside | 93.5 mm |
| Angle pulley | 17 ° |
| Hardness level Counter pressure spring | Standard (30 kg - steel-colored) |
| Ø outside | 100 mm |
| Area of application | Standard |
| Alternative version of the Piaggio OEM number | 221171, 104649 |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Hot 
swiing® ingenious pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® ingenious parts · Material: Steel · Material: special bearing bronze · Gearbox type: Vario · Surface: gas nitrided · Ø Outer pulley: 96 mm · Alternative version of the Piaggio OEM number: 103382 · Alternative version of the Piaggio OEM number: 103823 · Alternative version of the Piaggio OEM number: 220923 · Alternative version of the Piaggio OEM number: 220924
CHF 119.90
Not in stock
GPO converter with swiing® pulleys Ø 96 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Gearbox type: Vario · Ø outside: 96 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of the Piaggio OEM number: 104649 · Alternative version of the Piaggio OEM number: 221171
CHF 179.90
Not in stock
GPO converter Vario Ø 100 mm | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Gearbox type: Vario · Ø outside: 100 mm · Area of application: Standard · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Alternative version of the Piaggio OEM number: 104649 · Alternative version of the Piaggio OEM number: 221171
CHF 139.90
Moped fans also bought
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 6 V · Performance: 50 W · Type of current: Alternating current (AC) · Total length: 50 mm · Height: 15 mm · Width: 27 mm · Ø mounting hole: 6 mm · Mounting type: Screws
CHF 29.90
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
CHF 19.90
GPO converter Ø 100 mm (bell selection) | Piaggio Ciao, SI
Manufacturer: GPO · Gearbox type: Vario · Ø outside: 100 mm · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Piaggio OEM number: 006426 · Piaggio OEM number: 120870 · Piaggio OEM number: 124775 · Piaggio OEM number: 190312 · Piaggio OEM number: 220441 · Piaggio OEM number: 221171
CHF 174.90
Collection only possible with online purchase and appointment.
