Original reproduction air filter for your Puch Maxi S / N moped.
The air filter box is supplied in disassembled condition.
To make assembly easier, we recommend briefly placing the air filter housing in warm water to soften the plastic.
Carburetor connection diameter: 20 mm
Select the desired air filter screen in the selection field:
- Standard: original air filter screen
- Racing: screen with fewer filter layers for more air flow
- Tuning: two-layer filter mat for maximum air flow
Note: From the factory, a joint with silicone sealant was drawn around the seam of the original air filter after the two parts were joined to exclude the risk of air leakage. We recommend doing the same with this air filter.
You will find a suitable sealant and other useful parts in the accessories section.Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Manufacturer: GPO · Color: black · Material: Plastic · Total length: 230 mm · Height: 103 mm · Ø inside: 20 mm · Mounting type: Plug connection clamped · Number of fixing points: 2 pcs · Area of application: Original, Standard
| Manufacturer | GPO |
| Material | Plastic |
| Color | black |
| Ø Internal connection | 20 mm |
| Puch |
Accessories & related products
swiing® revival nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Total length: 6 mm · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64
CHF 15.90
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Area of application: Chemistry · Gap dimension (max.): 2 mm
CHF 19.90
CHF 284.29/l
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs
CHF 2.80
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Thread length: 50 mm · Color: silver · Total length: 47 mm · Total length: 60 mm · Thread type: M5x0.8 (standard thread)
CHF 12.90
Hot 
swiing® ingenious 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Total length: 66 mm · Ø Output inside: 15 mm · Width: 50 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Ø inside: 15 mm · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 46 mm
CHF 34.90
Collection only possible with online purchase and appointment.
