Original reproduction air filter for your Puch Maxi S / N moped / moped with standard Bing or swiing® SRE carburetor.
The complete air filter box is supplied pre-assembled. As usual from the factory, it has already been carefully sealed by hand with a silicone joint around the seam to minimize the risk of air leakage and make it easier to adjust the carburettor.
The complete air filter set includes the two housings, the mounting brackets, the air filter hose, the two air filter plugs and the original filter screen installed in the air filter.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Filter type | Standard sieve |
| Color | black |
| Mounting type | Plug connection clamped |
| Ø Internal connection | 20 mm |
| Area of application | Original, Standard |
| Puch | E50 |
Ratings
Accessories & related products
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Area of application: Chemistry · Color: black · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
CHF 19.90
CHF 284.29/l
swiing® ingenious 17 mm carburetor set camouflaged | Puch E50
Nominal diameter: 17 mm · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRF · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Nozzle size: 74 · Ø Air filter connection: 27.5 mm · Mixed oil connection: No · Nozzle block: 2.2 · Clamping screw torque (max.): 4 N/m · Area of application: Racing · Area of application: Tuning
CHF 179.90
Moped fans also bought
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Height: 55 mm · Decompressor: No · Area of application: Standard
CHF 32.90
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 58 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Total length: 920 mm · Flame tube attachment: Flange
CHF 64.90
Hot 
swiing® revival 12 mm carburetor "Original" | Puch
Total length: 65 mm · Width: 50 mm · Height: 108 mm · Manufacturer: swiing® revival parts · Color: gray · Material: Aluminum · Camouflaged: No · Area of application: Standard · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Nominal diameter: 12 mm · Ø fuel hose connection: 6 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Mounting type: Plug connection clamped · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
CHF 69.90
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Ø inside: 12 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Ø External connection: 20 mm · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 45.5 mm · Area of application: Original
CHF 34.90
Hot
swiing® revival 38 mm cylinder kit 1.6 hp CH12 "Original" | Puch
Nominal diameter: 38 mm · Manufacturer: swiing® revival parts · Camouflaged: Yes · Surface: sandblasted · Displacement: 50 ccm · Material: Aluminum · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 19 mm · Ø Inlet inside: 9 mm · Hole spacing inlet: 38 mm · Thread inlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Area of application: Standard · Decompressor: Yes · Alternative version of the Puch OEM number: 349.7.10.105.0
CHF 104.90
swiing® revival nozzle set M3.5 (50 - 60) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Quantity: 11 pcs · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60
CHF 21.90
swiing® revival 50 ccm 1.6 hp cylinder set "Original" | Puch E50
Nominal diameter: 38 mm · Manufacturer: GPO · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: sandblasted · Displacement: 50 ccm · Number of fixing points: 4 pcs · Outlet type: straight · Decompressor: No
CHF 349.90
Collection only possible with online purchase and appointment.
