Complete standpipe set suitable for Puch Maxi S & N mopeds / mopeds.
The set consists of left & right fork leg, spring inserts, cover sleeves, rubber springs and sliding bushes.
Ø fork leg: 23 mm
Block for brake anchor plate: 74 x 16/8 x 16 mm (LxWxH)
Total length: 495 mm
Below block to below fork leg: 46 mm
Spring length incl. insert: 210 mm. Insert: 210 mm
Note: This is a cheap reproduction product that cannot be compared with the original fork legs.
The springs are slightly longer, which means that the sliding bush protrudes slightly from the steerer tube. In addition, the welded-on tab on the fork leg may need to be compressed slightly so that it fits into the brake anchor plate.
Accessories for the dip tubes such as reinforced springs can be found in the accessories section.
Good-quality reproduction product from the Asian market.
| Manufacturer | Quenching |
| Material | Steel |
| Surface | chrome-plated |
| Adjustable | No |
| Color | Chrome |
| Ø spars | 23 mm |
| Distance brake cam to wheel axle center-center | 38 mm |
| Total length | 578 mm |
| Puch |
Ratings
Accessories & related products
EBR standard fork chrome | Puch
Manufacturer: EWC · Surface: chrome-plated · Thread type: MF26x1 (fine pitch thread) · Adjustable: No · Material: Steel · Ø spars: 23 mm · Color: Chrome · Thread length: 57 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 383 mm · Distance brake cam to wheel axle center-center: 40 mm · Total length: 570 mm
CHF 129.90
EBR fork with lock black | Puch Maxi
Manufacturer: EWC · Material: Steel · Color: Chrome · Color: black · Surface: chrome-plated · Surface: varnished · Adjustable: No · Ø spars: 23 mm · Spar end distance (center-center): 120 mm · Ø outer head tube: 26.2 mm · Ø head tube inside: 22.3 mm · Head tube length: 180 mm · Total length: 580 mm · Fork bridge - center wheel axle: 385 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
CHF 159.90
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
swiing® revival 17" front fender square Inox | Puch Maxi S, N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Folding the ends: closed folded · Color: Chrome · Shape of the mudguard: angular · Wheel size: 17 " · Total length over ends: 565 mm · Scope: 740 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 200 mm · Mounting type: Nuts & bolts
CHF 34.90
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom | Puch Maxi S, N
Possible lever positions: open / closed / reserve · Material lever: Aluminum · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Thread type: MF12x1 (fine pitch thread) · Spare tube shape: curved · Reserve level: 70 mm · Puch OEM number: 349.3.22.030.0 · Puch OEM number: 349.4.22.030.0
CHF 9.90
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Material: Steel · Surface: chrome-plated · Nut type: Cap nut · Thread type: MF26x1 (fine pitch thread) · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Drive: External hexagon · Width across flats: 30 mm · Height: 13.8 mm · Thread depth: 12 mm · Area of application: Standard
CHF 9.90
Not in stock
Collection only possible with online purchase and appointment.
