Special side-pipe exhaust for your Puch Maxi S moped.
The black-painted tuning exhaust comes ready for installation with the required mounting bracket.
The mounting flange is attached to a slotted hole, allowing for ideal positioning.
Note: To install this on your Maxi N, you’ll need to either use an additional clamp or bridge the gap with an extension strut.
Depending on the batch, the paint finish may not be highly resistant to vibrations or environmental factors. We recommend using heat-resistant paint to reinforce the finish.
You can find both items, as well as alternative mufflers, in the accessories section.
A quality product manufactured in Portugal.
| Manufacturer | Made in Portugal |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Total length | 860 mm |
| Mounting type | Nuts & bolts |
| Ø outside | 60 mm |
| Ø Flame tube outside | 28 mm |
| Number of fixing points | 3 pcs |
| Ø Internal connection | 24.5 mm |
| Exhaust type | Sidepipe |
| Flame tube attachment | Stud bolts & nuts |
| Puch | E50 |
Accessories & related products
Exhaust 18 mm replica (with number) | Puch Maxi S, N
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 920 mm · Ø Silencer: 59 mm · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Flame tube outside: 18 mm · Exhaust type: Flute · Ø Internal connection: 14 mm · Flame tube attachment: Flange
CHF 57.90
Exhaust 22 mm 2-piece replica (with number) | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 920 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Ø outside: 58 mm · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
CHF 64.90
66HEROES Exhaust bracket 50 mm flat Inox
Thickness: 4 mm · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Number of fixing points: 2 pcs · Hole spacing: 50 mm · Total length: 81 mm
CHF 11.90
66HEROES Exhaust bracket 75 mm flat Inox
Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Surface: electropolished · Total length: 106 mm · Thickness: 4 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 75 mm · Number of fixing points: 2 pcs
CHF 12.50
66HEROES Exhaust bracket 100 mm flat Inox
Surface: electropolished · Manufacturer: 66HEROES · Material: Chrome steel (colloquially known as stainless steel) · Total length: 130 mm · Thickness: 4 mm · Ø mounting hole: 8.3 mm · Ø mounting hole: 20 mm · Hole spacing: 100 mm · Number of fixing points: 2 pcs
CHF 12.90
Not in stock
Hot 
swiing® ingenious 28 mm Graphite Exhaust Gasket | Puch, Tomos
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Area of application: Tuning · Place of use: Exhaust · Reinforced: No · Ø outlet inside: 28 mm · Thickness: 3 mm · Ø screw holder: 6.6 mm · Ø inside: 27.4 mm · Hole spacing outlet: 42.5 mm
CHF 7.40
Exhaust set Sidepipe Ø 28 / 60 mm chrome | Puch
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Ø outside: 60 mm · Total length: 600 mm · Color: Chrome · Ø Internal connection: 28 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
CHF 154.90
swiing® ingenious resonance exhaust set Ø 28 / 70 mm | Puch Maxi, X30 Sport
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Ø outside: 70 mm · Mounting type: Screwed clamp · Ø Internal connection: 28 mm · Total length: 730 mm · Exhaust type: Cigar · Flame tube attachment: Flange
CHF 119.90
Exhaust Boss Demper Ø 28 / 60 mm chrome
Surface: chrome-plated · Material: Steel · Color: Chrome · Ø outside: 60 mm · Total length: 580 mm · Ø Silencer: 60 mm · Ø Internal connection: 28 mm · Exhaust type: Dragpipe / sharp end · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
CHF 99.90
MOTIP heat-resistant clear lacquer (matt) 400 ml
Manufacturer: MOTIP · Area of application: Paint & varnish · Contents: 400 ml · Color: transparent · Hazard warning: Causes serious eye damage · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): 0 - 800 °C
CHF 24.90
CHF 62.25/l
Exhaust sidepipe 28 mm chrome | Puch Maxi S
Surface: chrome-plated · Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Ø outside: 60 mm · Total length: 860 mm · Ø Internal connection: 24.5 mm · Ø Flame tube outside: 28 mm · Exhaust type: Sidepipe · Mounting type: Nuts & bolts · Flame tube attachment: Stud bolts & nuts · Number of fixing points: 3 pcs
CHF 124.90
Explore categories from Exhaust system
Moped fans also bought
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Manufacturer: swiing® revival parts · Material: Nylon · Color: black · Total length: 19 mm · Ø Bundle: 24.1 mm · Ø inside: 16.2 mm · Ø outside: 20.2 mm · Puch OEM number: 349.1.42.005.1
CHF 2.50
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
CHF 12.90
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
CHF 79.90
Hot
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
CHF 9.90
GPO side bars black matt (1A quality) | Puch Maxi S
Surface: varnished · Manufacturer: GPO · Material: Steel · Color: black · Width: 170 mm · Ø outside: 12.5 mm · Height: 35 mm · Total length: 420 mm · Ø mounting hole: 8.1 mm · Hole spacing: 410 mm · Mounting type: Screws · Number of fixing points: 4 pcs
CHF 29.90
Handlebar fork plate 30 cm curved black
Surface: varnished · Manufacturer: Made in Portugal · Material: Steel · Color: black · Clamping diameter: 22 mm · Width: 610 mm · Ø outside: 22 mm · Height: 300 mm · Fork plate holder length: 75 mm · Length handlebar ends: 145 mm · Crossbar: No · Mounting type: Fork plate
CHF 38.90
GPO mudguard strut front 17" black
Manufacturer: GPO · Material: Steel · Surface: varnished · Color: black · Wheel size: 17 " · Distance mudguard - center hole: 300 mm · Mounting type: Nuts & bolts · Ø mounting hole: 7 mm · Ø mounting hole: 12.5 mm · Number of fixing points: 4 pcs · Total length: 305 mm
CHF 14.90
Working late? Evening hours on Thursday until 20:00
