Hydraulic telescopic fork of the EBR brand suitable for Piaggio Ciao mopeds.
Special bracket for mounting a disc brake system. The lower mounting hole is 53 mm above the wheel axle.
The two mounting holes with Ø8.7 mm are 61 mm apart. The upper hole is therefore 114 mm above the wheel axle.
The two aluminum end bolts on the fork legs make it much easier to change the oil.
The solid fork is largely made of aluminum.
The snap ring is included in the scope of delivery. Further accessories can be found below.
Total length: 67 cm
Head tube length: 220 mm
Internal diameter of head tube (for stem mounting): 21.5 mm
Internal distance between fork legs (for mounting the rear axle): 120 mm
Head tube thread: 1" / 24G
Branded product from the Italian manufacturer EBR.
Details
| Manufacturer | EWC |
| Material | Aluminum, Steel |
| Surface | varnished, chrome-plated |
| Color | black, Chrome |
| Adjustable | Yes |
| Thread type | FG25.4 (1" 24G) |
| Spar end distance (center-center) | 150 mm |
| Ø outer head tube | 25.4 mm |
| Total length | 660 mm, 635 mm |
| Ø spars | 28 mm |
| Ø head tube inside | 21 mm |
| Thread length | 58 mm |
| Head tube length | 220 mm |
| Fork bridge - center wheel axle | 390 mm |
| Distance brake cam to wheel axle center-center | 35 mm |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 |
Accessories & related products
GPO control bearing set | Piaggio Ciao
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Bearing type: Bearing ring · Color: silver · Thread type: FG25.4 (1" 24G) · Ø ball [inch] / [mm]: 5/32" (4.00 mm) · Ø mounting frame: 30.05 mm · Ø inside: 27 mm · Ø outside: 41.4 mm · Ø outside: 42 mm · Height: 10.5 mm · Height: 17 mm
CHF 18.90
swiing® revival front fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Mounting type: Nuts & bolts · Piaggio OEM number: 274184
CHF 34.90
swiing® revival front fender Inox black | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: varnished · Color: black · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Mounting type: Nuts & bolts
CHF 49.90
Not in stock
Clamping screw front brake original | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Piaggio · Material: Steel · Surface: galvanized (blue) · Number of components: 7 pcs · Thread type: M7x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Thread length: 13.5 mm · Width across flats SW: 11 mm · Total length: 20.5 mm · Area of application: Original · Piaggio OEM number: 154533
CHF 16.90
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Total length: 6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Number of components: 2 pcs · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Ø outside: 5 mm
CHF 2.00
Brake caliper, brake hose & brake lever for EBR forks
Hole spacing: 32 mm · Hole spacing: 60 mm · Material: Cast aluminum · Color: gray · Thread type: M8x1.25 (standard thread) · Cable length: 900 mm · Surface: varnished · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Brake lever length (lever length): 162 mm · Ø Handlebars: 22 mm
CHF 164.90
Collection only possible with online purchase and appointment.
