This paint set is a reproduction of the original copper paint used by Puch (original paint code P6801T).
The copper-orange glaze matches the original color 100%.
The set includes 400 ml of silver primer (recreated based on the original sample) and 400 ml of copper-orange (glaze); the mixing ratio for the glaze is 1:1, resulting in 0.8 l ready for spraying.
The mixing ratio for the silver base coat is also 1:1.
It is essential to use two-coat thinner (BC thinner / base coat thinner) as a diluent.
After preparing the moped parts as usual, apply a full coat of the silver base. After a flash-off time of approximately 30 minutes, apply two or three even coats (depending on the coat thickness) of the copper-orange glaze. Since the amount of glaze applied can alter the color tone, it is recommended to create a color sample first and then paint the moped using the same system!
It is essential to apply a topcoat of two-component clear coat after another 30-minute flash-off time. However, this is not included in the set.
| Puch |
Accessories & related products
Explore categories from Paints & varnishes
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Ø bore: 4 mm · Manufacturer: KMC · Number of chain links: 128 pcs · Chain type: 415H · Material: Steel · Chain lock type: Spring lock · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Color: gray · Rolling circumference: 1626 mm · Ø Pin: 3.94 mm
CHF 12.50
swiing® revival 17" rear fender Inox | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
CHF 37.90
Hot
GPO Gear Ring 45 T, Black | Puch Maxi, X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Thickness: 4.5 mm · Ø mounting hole: 6.7 mm · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Cranking (offset): 8 mm · Hole spacing: 36.5 mm · Ø inside: 94 mm · Hole spacing 2: 68 mm
CHF 24.90
Hot
swiing® revival Tank Decal “PUCH maxi S” 204 x 29 mm | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Color: Chrome · Border: Chrome surround · Color: black · Color: green · Color: white · Consistency: UV-resistant · Consistency: petrol resistant · Width: 204 mm · Rear side texture: Adhesive · Place of use: Tank (+ frame) · Height: 29 mm · Transferfolie: No · Puch OEM number: 349.2.20.537.0
CHF 8.50
Working late? Evening hours on Thursday until 20:00
