Tuning clutch for Puch Maxi S / N, Puch Supermaxi LG1 mopeds / mopeds which have an E50 input engine with kickstarter installed.
Before installing the centrifugal clutch, make sure that the openings of the retaining rings (BZ rings) are facing outwards.
This prevents the BZ rings from loosening during operation.
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
swiing® revival nut & washer for clutch (kickstart) | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF10x1 (fine pitch thread) · Height: 5 mm · Drive: External hexagon · Nominal diameter (thread): 12 mm · Width across flats: 19 mm · Strength class: 8
CHF 5.90
Explore categories from Clutch
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Spring steel · Surface: coated · Number of components: 3 pcs · Total length: 28 mm · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm
CHF 17.90
CHF 15.90
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Thread type: M6x1 (standard thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
CHF 1.80
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
CHF 2.40
NGK CR6 Racing ignition cable & plug High End red / 5 kΩ interference suppressed
Manufacturer: NGK · Material: Rubber · Color: red · Ø cable: 7 mm · Cable available: Yes · Resistance: 5000 Ω · Subcategory: Ignition cable · Subcategory: Spark plug connector · Suppressed: Yes · Cable length: 1000 mm
CHF 39.90
Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Thread type: MF10x1 (fine pitch thread) · Manufacturer: swiing® ingenious parts · Weight: 968 g · Area of application: High End · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Cheek type: Full cheeks · Material: Steel · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
CHF 179.90
Working late? Evening hours on Thursday until 20:00
