High-quality clutch basket with spur gear suitable for your Puch moped / moped with E50 3- and 4-bearing engine and kickstart mechanism.
This set contains CNC-machined parts made of hardened steel, which have been specially designed for high loads. The straight-toothed gear wheel made of special steel impresses thanks to the finely ground teeth for optimum running smoothness and very low wear.
The small gear wheel attached to the clutch basket is firmly welded to the clutch basket and thus offers the optimum conditions for both an original setup and a tuning setup.
| Manufacturer | ASP |
| Material | Steel |
| Surface | hardened & ground |
| Number of teeth | 19 pcs, 94 pcs |
| Toothing type | straight toothed |
| Area of application | Tuning, Racing |
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Ø outside: 93 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Thickness: 20.3 mm · Area of application: Racing
CHF 299.90
Explore categories from Gearbox & housing (motor)
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Ø inside: 4.8 mm · Total length: 28 mm · Ø outside: 8.3 mm · Number of components: 3 pcs
CHF 17.90
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Camouflaged: Yes · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Tuning
CHF 32.90
Nut flywheel M10x1 SW15 serrated
Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Ø outside: 19.8 mm · Thread type: MF10x1 (fine pitch thread) · Material: Steel · Drive: External hexagon · Nominal diameter (thread): 10 mm · Height: 10.5 mm · Width across flats: 15 mm
CHF 2.90
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 106 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
CHF 7.40
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Manufacturer: swiing® ingenious parts · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø piston pin (B): 12 mm · Ø Connecting rod eye: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread type: MF10x1 (fine pitch thread) · Thread length: 11 mm · Thread length: 15 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Weight: 970 g · Number of gears: 1 pcs · Area of application: High End
CHF 229.90
Working late? Evening hours on Thursday until 20:00
