Special, hand-made H100A+ racing exhaust system for your Puch moped / moped with E50 engine and exhaust outlet.
This racing exhaust is ideal for cross or racing use and, compared to the ADDY H100A, generates a strong power band, especially in the low to medium speed range, thanks to the extended midrange. The ideal exhaust timing for these racing engines is around 160 to 185 rpm.
Notes: We recommend using nuts with a key width of 8 or 9 mm for fastening to the outlet.
When used on a standard Puch Maxi frame, we recommend replacing the original fuel tap with an intermediate piece in conjunction with a 90° outgoing fuel tap.
Other complete racing systems as well as engine cases, cylinder kits and the aforementioned fuel outlet parts can be found in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
| Manufacturer | ADDY |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Total length | 870 mm |
| Ø Silencer | 55 mm |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
| Number of fixing points | 3 pcs |
| Mounting type | Nuts & bolts, Stud bolts & nuts |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Width across flats: 8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Height: 6 mm · Drive: External hexagon · Thread type: M6x1 (standard thread)
CHF 2.90
Gilardoni italkit cylinder head 47 mm (75 ccm)
Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Ø cylinder: 47 mm · Width: 155 mm · Height: 58 mm · Total length: 155 mm · Ø screw holder: 6.5 mm · Candle thread: long · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Area of application: Tuning
CHF 68.90
Hot 
MLM exhaust "Crazy Pipe" black straight outlet | Puch
Manufacturer: MLM · Material: Steel · Surface: varnished · Color: black · Ø outside: 91 mm · Ø Internal connection: 22 mm · Ø Silencer: 45 mm · Number of fixing points: 3 pcs · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts · Mounting type: Nuts & bolts · Total length: 945 mm
CHF 344.90
Not in stock
ADDY exhaust H100A | Puch
Manufacturer: ADDY · Material: Steel · Surface: varnished · Color: black · Ø Silencer: 55 mm · Number of fixing points: 3 pcs · Exhaust type: Cone / double cone · Flame tube attachment: Flange · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Total length: 820 mm
CHF 249.90
Explore categories from Exhaust system
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Width across flats: 7 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Thread length: 7 mm · Ø outside: 8 mm · Total length: 15 mm · Screw head: Hexagon · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Thread type: M6x1 (standard thread) · Area of application: Standard
CHF 2.50
Dell'Orto 21 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Width: 72 mm · Carburetor type: PHBG AS · Height: 125 mm · Nominal diameter: 21 mm · Total length: 82 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Nozzle size: 92 · Size of secondary nozzle: 50 · Mounting type: Plug connection clamped · Area of application: Tuning
CHF 119.90
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
CHF 12.50
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Quantity: 10 pcs · Component group Carburetor: Spraying · Material: Brass · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100
CHF 20.90
Hot
Inner cable set automatic | Puch E50
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm
CHF 9.90
Fortune / Merrick 2.50 - 2.75 x 17" inner tube
Manufacturer: Fortune · Tire width: 2.5 - 2.75 " · Tire width: 2.75 " · Tire width [mm]: 63.5 - 69.85 · Width: 2 1/2 " · Width: 2 3/4 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 21 x 2.5 " · Old designation: 21 x 2.75 " · Valve type: TR4 Auto valve
CHF 11.90
Cable set E50 engine automatic black | Puch Maxi S / N
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Material: Steel · Quantity: 4 pcs · Color: black · Total length: 1600 mm · Total length: 2200 mm · Outer shell length: 6000 mm
CHF 19.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
