Black, adjustable dampers for your moped, moped and small motorcycle.
The hardness or the preload of the dampers can be adjusted by the special spring mount.
Length (mount - mount): 280 mm
Outer diameter of coil spring: 49 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
Branded product from the manufacturer Xtreme.
| Manufacturer | Xtreme |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Hole spacing | 280 mm |
| Surface | varnished |
| Color | black |
| Damping type | Spring |
| Ø outside | 49 mm |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Ø spars | 30 mm |
| Universal |
| Tomos |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Color: blue · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Number of components: 17 pcs · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread)
CHF 17.90
MKX shock absorber 28 cm chrome
Manufacturer: MKX · Material: Platinum · Color: Chrome · Surface: chrome-plated · Damping type: Spring · Adjustable: Yes · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Number of fixing points: 2 pcs · Ø spars: 24 mm · Mounting type: Nuts & bolts · Ø outside: 46 mm · Hole spacing: 280 mm
CHF 49.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
- 12 %
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Surface: blank / oiled · Ø bore: 4 mm
CHF 12.50
CHF 10.90
Hot
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Total length: 580 mm · Adjustable: No · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Thread type: MF26x1 (fine pitch thread) · Ø head tube inside: 22 mm · Ø spars: 28 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm · Color: Chrome · Color: black · Thread length: 57 mm
CHF 132.90
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Ø outside: 22 mm · Mounting type: Fork plate · Material: Steel · Color: Chrome · Width: 730 mm · Height: 400 mm · Fork plate holder length: 100 mm · Surface: chrome-plated · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 320 mm
CHF 35.90
Handlebar fork plate 30 cm curved with strut solid black
Ø outside: 22 mm · Mounting type: Fork plate · Material: Steel · Color: black · Width: 640 mm · Height: 280 mm · Fork plate holder length: 80 mm · Surface: varnished · Clamping diameter: 22 mm · Length handlebar ends: 190 mm · Crossbar: Yes · Ø Strut: 10 mm · Strut length: 200 mm
CHF 57.90
Handlebar fork plate 15 cm cross black
Material: Steel · Surface: varnished · Ø outside: 22 mm · Fork plate holder length: 100 mm · Clamping diameter: 22 mm · Length handlebar ends: 150 mm · Width: 710 mm · Height: 150 mm · Crossbar: Yes · Mounting type: Fork plate · Color: black · Ø Strut: 12.5 mm · Strut length: 230 mm
CHF 24.90
GPO steerer tube nut M26x1 closed fork plate chrome
Manufacturer: GPO · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Material: Steel · Area of application: Standard · Nut type: Cap nut · Height: 13.8 mm · Drive: External hexagon · Surface: chrome-plated · Thread type: MF26x1 (fine pitch thread) · Width across flats: 30 mm · Thread depth: 12 mm
CHF 9.90
Collection only possible with online purchase and appointment.
