Hot 
Fan-cooled 41 mm S3 (55 cc) racing kit suitable for your moped or small motorcycle with a Sachs 50/2 (DE) or 50/3 engine.
This tuning cylinder is a clear statement for anyone who wants real performance. Meticulously handcrafted by Tivedens Motor, this cylinder delivers uncompromising torque, crisp throttle response, and a riding experience that immediately impresses. Each individual cylinder is numbered and crafted with extensive experience, technical expertise, and a genuine passion for performance. Depending on the setup used, the manufacturer claims it can deliver 6.9–7.3 hp.
A racing cylinder for anyone who doesn’t want to spend time comparing options, but is looking for a part that works, delivers performance, and is simply fun. Install it, ride it, smile.
Scope of delivery as shown in Image 1.
Note: The cylinder is equipped with a large square intake port for a 17 mm carburetor and a large M40 exhaust thread. Please take this into account when selecting your additional components. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the matching cylinder head, mounting hardware, exhaust systems, and threadlocker in the accessories section.
Quality product from the Swedish manufacturer Tivedens Motor AB
| Nominal diameter | 41 mm |
| Manufacturer | Tivedens Motor AB |
| Material | Gray cast iron |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 44 mm |
| Surface | varnished |
| Ø Outlet outside | 40 mm |
| Ø outlet inside | 29.5 mm |
| Inlet window | 17 x 15 mm |
| Number of fixing points | 4 pcs |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 31 mm |
| Area of application | Tuning |
| Ø piston pin (B) | 12 mm |
| Outlet type | Union nut |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Sachs | 50/2 50/3 50/4 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
CHF 21.90
CHF 2’190.00/l
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 4.9 mm · Nominal diameter (thread): 5 mm · Thread length: 6 mm · Thread length: 12 mm · Total length: 23 mm · Thread type: M5x0.8 (standard thread) · Area of application: Standard · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
CHF 1.80
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Number of components: 12 pcs · Material: Steel · Surface: galvanized (blue) · Ø shaft: 5.85 mm · Shank length: 8 mm · Color: silver · Nominal diameter (thread): 6 mm · Drive: External hexagon · Thread length: 22 mm · Total length: 34 mm · Screw head: Hexagon · Width across flats: 10 mm · Shank: Yes · Thread type: M6x1 (standard thread) · Area of application: Standard · Strength class: 10.9
CHF 4.90
Exhaust set Sidepipe Ø 32 / 60 mm chrome | Sachs 50/2
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 60 mm · Total length: 600 mm · Ø Internal connection: 32 mm · Ø Flame tube outside: 32 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
CHF 169.90
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Total length: 132 mm · Nominal diameter: 17 mm · Height: 100 mm · Width: 85 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Mounting type: Flange · Vacuum connection: No · Area of application: Standard · Area of application: Tuning · Choke control: without choke
CHF 126.90
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø outside: 98 mm · Ø cylinder: 41 mm · Candle thread: long · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Ø screw holder: 19 mm · Decompressor: M10x1.5 · Total length: 127 mm · Width: 95 mm · Height: 50 mm · Area of application: Standard
CHF 68.50
swiing® ingenious exhaust nut M40x1.5 long 32 mm manifold | Sachs
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Nut type: Union nut · Ø inside: 32.5 mm · Ø outside: 45 mm · Nominal diameter (thread): 40 mm · Thread type: MF40x1.5 (fine pitch thread) · Height: 22 mm
CHF 21.70
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø outside: 108 mm · Ø cylinder: 41 - 43 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 37 x 37 · Ø screw holder: 19.3 mm · Decompressor: M10x1.5
CHF 149.90
Hot
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole spacing inlet: 31 mm · Area of application: Tuning
CHF 289.90
Hot
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread) · Hole spacing inlet: 31 mm · Area of application: Tuning
CHF 319.90
Explore categories from Cylinder
Moped fans also bought
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Ø inside: 15 mm · Stock number: E15 · Ø outside: 35 mm · Width: 8 mm · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
CHF 24.90
swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs
Ø inside: 33.5 mm · Ø outside: 46 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Union nut · Height: 19 mm · Nominal diameter (thread): 40 mm · Thread type: MF40x1.5 (fine pitch thread)
CHF 13.90
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Number of components: 12 pcs · Material: Steel · Surface: galvanized (blue) · Ø shaft: 5.85 mm · Shank length: 8 mm · Color: silver · Nominal diameter (thread): 6 mm · Drive: External hexagon · Thread length: 22 mm · Total length: 34 mm · Screw head: Hexagon · Width across flats: 10 mm · Shank: Yes · Thread type: M6x1 (standard thread) · Area of application: Standard · Strength class: 10.9
CHF 4.90
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Total length: 250 mm · Width: 170 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 0.4 mm · Number of components: 1 pcs · Ø inside: 86 mm · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
CHF 5.90
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Total length: 132 mm · Nominal diameter: 17 mm · Height: 100 mm · Width: 85 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Mounting type: Flange · Vacuum connection: No · Area of application: Standard · Area of application: Tuning · Choke control: without choke
CHF 126.90
swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Place of use: Cylinder head · Nominal diameter: 41 mm · Ø inside: 41.7 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø cylinder: 41 mm · Thickness: 0.3 mm · Hole pattern [mm]: 37 x 37 · Area of application: Standard
CHF 4.90
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø outside: 98 mm · Ø cylinder: 41 mm · Candle thread: long · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Ø screw holder: 19 mm · Decompressor: M10x1.5 · Total length: 127 mm · Width: 95 mm · Height: 50 mm · Area of application: Standard
CHF 68.50
Working late? Evening hours on Thursday until 20:00
