First 41 - 43 mm cylinder head in original look with enlarged fins, suitable for Sachs 502, 50/2, 50/3, 50/4 engines.
Thanks to the larger fin design, the cylinder head can optimally dissipate heat even at high temperatures and slow uphill rides.
The hole for the decompressor is prepared and threaded (M10 x 1.5 mm). If a decompressor is installed, it only needs to be drilled through with a 3 mm drill bit.
Ø Cylinder: 41.0 - 43.0 mm (type L)
Perforation pattern for cylinder head screws: 37 x 37 mm
Decompressor thread: M10 x 1.5 mm
Ø Silentblower mount: 19.3 mm
Ø outside: 108 mm
Ø outside under casing: 86 mm
The cylinder head is installed without gasket, the tightening torque of the cylinder head bolts (strength 10.9) is 11 - 13 Nm.
Matching add-on parts such as spark plugs, decompressors, silentblowers etc. can be found in the accessories section.
Made by the BADASS brand.
Details
| Manufacturer | BAD ASS |
| Material | Aluminum |
| Ø cylinder | 41 - 43 mm |
| Number of fixing points | 4 pcs, 1 pcs |
| Ø screw holder | 19.3 mm |
| Area of application | Tuning |
| Hole pattern [mm] | 37 x 37 |
| Ø outside | 108 mm |
| Decompressor | M10x1.5 |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) |
Accessories & related products
swiing nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Total length: 6 mm · Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
CHF 15.90
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Shank: Yes · Ø shaft: 5.85 mm · Total length: 34 mm · Shank length: 8 mm · Strength class: 10.9 · Thread length: 22 mm · Color: silver · Number of components: 12 pcs
CHF 4.90
Not in stock
swiing® ingenious cylinder head 41 mm tuning | Sachs 50/2, 50/3, 50/4
Total length: 127 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø cylinder: 41 mm · Width: 95 mm · Height: 50 mm · Surface: sandblasted · Number of fixing points: 4 pcs · Area of application: Standard · Ø screw holder: 19 mm · Candle thread: long · Hole pattern [mm]: 37 x 37 · Ø outside: 98 mm · Decompressor: M10x1.5
CHF 68.40
Hot 
Cylinder head CNC 41 mm Tuning | Sachs 50/3, 50/4 LKH
Manufacturer: Made in Europe · Material: Aluminum · Camouflaged: No · Ø outside: 128 mm · Height: 50 mm · Ø cylinder: 41 mm · Total length: 140 mm · Candle thread: short · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 37 x 37 · Decompressor: No
CHF 334.90
BAD ASS Diablo cylinder Ø 41 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Surface: raw · Nominal diameter: 41 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Hole spacing inlet: 31 mm
CHF 239.90
Moped fans like you also bought:
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SSB · Nominal diameter: 17 mm · Ø fuel hose connection: 6.2 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: without choke · Nozzle thread: MF7x0.75 (fine pitch thread) · Nozzle size: 76 · Mounting type: Stud bolts & nuts · Hole spacing inlet: 31 mm · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Total length: 116 mm · Width: 86 mm · Height: 99 mm · Area of application: Standard · Area of application: Tuning
CHF 79.90
swiing® revival stud bolt M5 x 23 mm inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Total length: 23 mm · Manufacturer: swiing® revival parts · Material: Steel · Diameter: 4.9 mm · Surface: galvanized (blue) · Area of application: Standard · Thread length: 6 mm · Thread length: 12 mm · Thread type: M5x0.8 (standard thread) · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
CHF 1.80
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Shank: Yes · Ø shaft: 5.85 mm · Total length: 34 mm · Shank length: 8 mm · Strength class: 10.9 · Thread length: 22 mm · Color: silver · Number of components: 12 pcs
CHF 4.90
Not in stock
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 41 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Ø piston pin (B): 12 mm · Piston weight: 86 g
CHF 39.90
swiing carburetor 17 mm Bing SSB 1/17/69
Nominal diameter: 17 mm · Manufacturer: swiing · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Width: 85 mm · Carburetor type: SSB · Total length: 132 mm · Height: 100 mm · Mounting type: Flange · Nozzle size: 76 · Hole spacing inlet: 31 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke
CHF 126.90
BAD ASS Diablo cylinder Ø 41 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Gray cast iron · Camouflaged: No · Area of application: Tuning · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Surface: raw · Nominal diameter: 41 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Hole pattern [mm]: 60 x 40 / 51 x 40 / 37 x 37 · Hole spacing inlet: 31 mm
CHF 239.90
swiing® ingenious 41 mm cylinder kit tuning diaphragm | Sachs 50/2 (CH)
Manufacturer: GPO · Manufacturer: swiing® ingenious parts · Material: Gray cast iron · Camouflaged: Yes · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 35 mm · Ø outlet inside: 26 mm · Ø Inlet inside: 19 mm · Area of application: Tuning · Inlet window: 57.5 x 19 · Thread inlet: M5x0.8 (standard thread) · Ø piston pin (B): 12 mm · Number of fixing points: 4 pcs · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Hole pattern [mm]: 60 x 40 / 37 x 37 · Hole spacing inlet: 68 mm
CHF 164.90
Collection only possible with online purchase and appointment.
