Silicone tank emblem «Ciao» for your Piaggio Ciao moped / moped.
The sticker has the look of brushed aluminum and the golden yellow border around the lettering adds a visual accent.
The change from the small to the large stickers took place on the Ciao in the middle of the SC model series. As a result, this 115x27 mm sticker fits into all large tank inserts of the SC, PX and C24 models.
From the factory, this 3D sticker was installed in Switzerland on early C24 models from 1998 onwards, and was then replaced by the colored and cut-out «Ciao» 3D sticker on the last models produced before 2006.
Sticker dimensions: 115x27x2 mm
Material: silicone
Durability: petrol resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
You will find suitable cleaning cloths and other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 813875
Alternative to the original Piaggio spare part number: 298723, 814489
Details
| Thickness | 2 mm |
| Manufacturer | Piaggio |
| Material | Silicone |
| Rear side texture | Adhesive |
| Mounting type | glue |
| Width | 115 mm |
| Height | 27 mm |
| Piaggio OEM number | 813875 |
| Alternative version of the Piaggio OEM number | 298723, 814489 |
Suitable for the following models
| Piaggio | Ciao - C24 |
Accessories & related products
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Total length: 115 mm · Manufacturer: Piaggio · Material: Silicone · Place of use: Tank (+ frame) · Width: 27 mm · Height: 1.5 mm · Rear side texture: Adhesive · Consistency: petrol resistant · Color: black · Color: silver · Puch OEM number: 298723
CHF 12.90
Not in stock
Tank sticker "Ciao" 3D silicone 109 x 25 mm original | Piaggio Ciao
Width: 109 mm · Thickness: 1.2 mm · Manufacturer: Piaggio · Material: Silicone · Color: Chrome · Color: orange · Rear side texture: Adhesive · Height: 25 mm · Piaggio OEM number: 814489 · Alternative version of the Piaggio OEM number: 298723 · Alternative version of the Piaggio OEM number: 813875
CHF 13.90
Sticker gel "KAT" left & right side protection | Piaggio Ciao, SI, Grillo
Material: Silicone · Surface: rubberized · Color: black · Color: gold · Color: gray · Color: yellow · Width: 155 mm · Height: 22 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Housing cover · Border: contour cut
CHF 21.50
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
CHF 9.90
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
CHF 9.90
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Width: 8 mm · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Area of application: Standard · Material: Plastic · Material: Steel · Surface: blank · Stock number: 6001 · Bearing type: Deep groove ball bearing · Ø inside: 12 mm · Ball bearing closed: Yes · Ø outside: 28 mm
CHF 5.90
ergotec handlebar stem 22 mm solid version.
Manufacturer: ergotec · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Color: black · Drive: Hexagon socket · Total length: 240 mm · Width: 32 mm · Ø Stem: 22 mm · Clamping diameter: 25.4 mm · Number of fixing points: 2 pcs
CHF 24.90
swiing® revival front fender primed | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Steel · Wheel size [inch]: 16 " · Wheel size [inch]: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Surface: primed · Total length over ends: 510 mm · Color: black · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 162 mm · Piaggio OEM number: 274184
CHF 32.90
Collection only possible with online purchase and appointment.
