Wonderful «Ciao» tank emblem made of silicone for your Piaggio Ciao moped / moped.
The chrome-colored sticker with orange border is a visual highlight and gives your Ciao that certain something extra.
The change from the small to the large stickers took place in the middle of the SC model series. As a result, this 109x25 mm sticker fits into all large fuel tank entries of the SC, PX and C24 models.
This 3D sticker was applied at the factory in Switzerland to the last models produced before 2006. Earlier models were supplied with either the aluminum tank sticker or the «Piaggio» 3D sticker with a silver background.
Dimension: 109x25x1.2 mm
Material: silicone
Durability: petrol-resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the sticker.
Suitable cleaning cloths can be found along with other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 814489
Alternative to the original Piaggio spare part number: 298723, 813875
Details
Manufacturer | Piaggio |
Material | Silicone |
Color | Chrome, orange |
Width | 109 mm |
Thickness | 1.2 mm |
Height | 25 mm |
Rear side texture | Adhesive |
Piaggio OEM number | 814489 |
Alternative version of the Piaggio OEM number | 298723, 813875 |
Suitable for the following models
Piaggio | Ciao - C24 |
Accessories & related products
Tank sticker "Ciao" 3D silicone 115 x 27 mm original | Piaggio Ciao
Manufacturer: Piaggio · Material: Silicone · Rear side texture: Adhesive · Thickness: 2 mm · Mounting type: glue · Width: 115 mm · Height: 27 mm · Alternative version of the Piaggio OEM number: 298723 · Piaggio OEM number: 813875 · Alternative version of the Piaggio OEM number: 814489
CHF 12.90
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Place of use: Tank (+ frame) · Manufacturer: Piaggio · Material: Silicone · Color: black · Color: silver · Total length: 115 mm · Rear side texture: Adhesive · Consistency: petrol resistant · Width: 27 mm · Height: 1.5 mm · Puch OEM number: 298723
CHF 12.90
Not in stock
Sticker gel "KAT" left & right side protection | Piaggio Ciao, SI, Grillo
Place of use: Housing cover · Material: Silicone · Surface: rubberized · Color: black · Color: gold · Color: gray · Color: yellow · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Width: 155 mm · Height: 22 mm · Border: contour cut
CHF 21.50
Moped fans like you also bought:
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm · Area of application: Standard
CHF 2.40
Stand 14 mm axle (1A quality) | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 232 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 78 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Total height: 250 mm
CHF 29.90
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Ø Cable bushing: 2.1 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Total length: 21.5 mm · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Ø shaft: 10.5 mm · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Drive: External hexagon · Thread length: 11 mm · Alternative version of the Piaggio OEM number: 154533
CHF 5.80
GPO license plate holder Inox black
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Surface: varnished · Total length: 147 mm · Width: 105 mm · Height: 6 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Color: black-matt · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm
CHF 12.90