Complete swingarm bearing for the rear swingarm of Sachs and Alpa mopeds, mopeds and small motorcycles.
Please make sure in advance that the dimensions of your installed bushings / axle match, as there are different versions.
Dimension of bushings:
Ø inner: 16 mm
Ø outer: 22 mm
Length: 20 mm
Material: Brass
Dimension of swingarm bolt:
Ø shaft: 16 mm
Shaft length: 90 mm
Thread: M12
Material: hardened steel
The black brünished and ground swingarm axle is fitted with a special nut, also hardened, and three spacers. The enclosed shim washers with thicknesses of 0.2, 0.5 and 1 mm make it possible to eliminate any axial play in the swing arm bolt.
Nostalgic product for the highest demands of the quality brand swiing®.
| Material | Steel, Brass |
| Surface | Hardened |
| Drive | Hexagon socket, External hexagon |
| Total length | 90 mm, 20 mm |
| Manufacturer | swiing® revival parts |
| Ø axle | 12 mm |
| Ø inside | 12 mm |
| Ø Bearing inside | 16 mm |
| Ø outside | 16 mm |
| Ø External bearing | 22 mm |
| Thread type | M12x1.75 (standard thread) |
| Sachs | |
| Alpa Chopper / Turbo |
Accessories & related products
CRC Grease high temperature 100 ml
Manufacturer: CRC · Area of application: Chemistry · Area of application: Fat · Contents [ml]: 100 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -30 - 150 °C
CHF 12.50
CHF 125.00/l
Moped fans also bought
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Manufacturer: NTN · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 6001 · Inner ring width: 12 mm · Width: 8 mm · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Ø inside: 12 mm · Ø outside: 28 mm · Area of application: Standard · Ball bearing closed: Yes
CHF 5.90
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4.05 mm · Ø Pin: 4 mm
CHF 18.90
Cut cable set Black | Sachs Automatic
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 1650 mm · Total length: 1850 mm · Total length: 2200 mm · Quantity: 4 pcs · Material: Steel · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm
CHF 21.90
ESJOT sprocket 40 teeth (4/5/6 hole) Ø 98 mm cranked black
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 98 mm · Thickness: 4.5 mm · Manufacturer: ESJOT · Material: Steel · Surface: powder-coated · Color: black · Ø bolt circle: 115 mm · Number of teeth: 40 pcs · Number of fixing points: 4 pcs · Ø mounting hole: 7 mm · Cranking (offset): 12 mm
CHF 29.90
MKX shock absorber 31 cm black
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: varnished · Color: black · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 310 mm · Number of fixing points: 2 pcs
CHF 49.90
Collection only possible with online purchase and appointment.
