Extension for the fuel dabber on Bing carburetors.
Fits Bing SSN, SSE, SRF, 85, SRA, SSB and many more.
Depending on the shape of the dabber, the extension must be fixed with a little glue, which you can find in the accessories section.
Swab extension length: 69 mm
Ø inside: 8.3 (slightly tapered)
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Color | black |
| Carburetor type | SRE, SRF, SSN, SSE, SRA (1/11/35) Velux, SRA (1/11/31) Velux, SSB, SLA |
| Total length | 69 mm |
| Ø inside | 8.3 mm |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Zündapp Belmondo | |
| ILO / JLO | |
| Kreidler | Flory MF |
Ratings
Accessories & related products
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Ø inside: 2.5 mm · Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Ø outside: 8 mm · Total length: 25 mm · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
CHF 3.90
swiing® revival choke extension Bing carburetor
Ø inside: 3.25 mm · Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Ø outside: 6 mm · Ø outside: 8 mm · Total length: 50 mm · Choke control: Hand choke
CHF 5.90
Loctite superglue 3 g (401)
Temperature resistance (min.): -40 - 140 °C · Manufacturer: Loctite · Material to be used: porous materials · Color: transparent · Contents: 3 g · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Type of application: 1K · Alignment time: 5 sec · Area of application: Chemistry
CHF 13.90
CHF 4’633.33/kg
Dab long Bing SRE, SSN, SSE, SRF, 85, SRA
Material: Plastic · Material: Steel · Component group Carburetor: Adjusting screws, float, etc. · Ø outside: 6 mm · Ø outside: 8 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Total length: 25 mm · Total length: 40 mm · Carburetor type: 85 · Color: white · Ø Passage: 2.5 mm
CHF 3.80
Moped fans also bought
swiing® revival start slide Bing SRE
Manufacturer: swiing® revival parts · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Width: 16 mm · Carburetor type: SRE · Height: 12.5 mm · Total length: 23.5 mm · Choke control: Hand choke · Alternative version of the Pony OEM number: A4599 · Alternative version of the Sachs OEM number: 0962 089 000
CHF 4.50
- 12 %
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Number of components: 1 pcs
CHF 2.40
CHF 2.10
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
CHF 2.80
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Manufacturer: BING · Material: Rubber · Color: black · Clamping diameter: 4 mm · Ø outside: 12 mm · Total length: 29 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
CHF 3.90
Hot
Leonelli 6V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Width: 27 mm · Type of current: Alternating current (AC) · Tension: 6 V · Height: 15 mm · Performance: 50 W · Total length: 50 mm · Ø mounting hole: 6 mm · Mounting type: Screws
CHF 29.90
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRE · Ø inside: 7.8 mm · Ø inside: 41 mm · Ø outside: 12.2 mm · Ø outside: 45 mm · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
CHF 4.90
swiing® revival choke extension Bing carburetor
Ø inside: 3.25 mm · Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Ø outside: 6 mm · Ø outside: 8 mm · Total length: 50 mm · Choke control: Hand choke
CHF 5.90
66HEROES cap nut with washer and threaded rod set M4 - M10 brass / steel
Manufacturer: 66HEROES · Material: Brass · Material: Steel · Surface: blank · Surface: galvanized (blue) · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Ø inside: 4.3 mm · Ø inside: 5.3 mm · Ø inside: 6.4 mm · Ø inside: 8.4 mm · Ø inside: 10.5 mm · Ø outside: 9 mm · Ø outside: 10 mm · Ø outside: 12 mm · Ø outside: 16 mm · Ø outside: 20 mm · Height: 8 mm · Height: 10 mm · Height: 12 mm · Height: 15 mm · Height: 18 mm · Thread depth: 5.5 mm · Thread depth: 7.5 mm · Thread depth: 8 mm · Thread depth: 11 mm · Thread depth: 13 mm · Width across flats: 7 mm · Width across flats: 8 mm · Width across flats: 10 mm · Width across flats: 13 mm · Width across flats: 17 mm
CHF 22.70
Collection only possible with online purchase and appointment.
