Complete wheel assembly for the front wheel of your Pony GTX 521 moped.
The set includes all necessary washers, nuts, cones, and ball bearings.
The front wheel axle is made of heavy-duty special steel and can withstand the highest loads.
The cone and lock nut on the speedometer drive side are already pre-assembled. This ensures the correct spacing is maintained, eliminating the need for time-consuming adjustment.
The colored markings show you where each part goes:
- green mark: brake anchor plate
- yellow mark: Replacement washer for the speedometer drive (the washer is not needed if a drive is installed)
- red mark: wheel hub
- blue mark: fork legs
You’ll find all the individual parts, along with matching bearing cups and a speedometer drive, in the accessories section.
A nostalgic product from the premium brand swiing® that meets the highest standards.
| Manufacturer | swiing® revival parts |
| Material | Steel, Chrome steel (colloquially known as stainless steel) |
| Surface | galvanized (blue) |
| Thread type | MF11x1 (fine pitch thread) |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
| Ø shaft | 10.25 mm |
| Shank length | 25 mm |
| Total length | 150 mm |
| Thread length | 55 mm, 65 mm |
| Ball bearing closed | No |
| Pony / Cilo (Beta 521 & 512) | Pony GTX 521 (frame) |
Accessories & related products
Nut M11x1 x 10 SW19 Wheel nut galvanized
Height: 10 mm · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Width across flats: 19 mm · Area of application: Standard · Strength class: 8
CHF 2.50
Nut M11x1 wheel nut | Pony GTX Beta 521 (P8392 / P8355)
Manufacturer: Pony · Nut type: Hexagon nut · Thread type: MF11x1 (fine pitch thread) · Drive: External hexagon · Nominal diameter (thread): 11 mm · Height: 6 mm · Width across flats: 24 mm · Pony OEM number: P8355 · Pony OEM number: P8392
CHF 3.60
Bearing cone M11x1 mm
Ø outside: 19 mm · Height: 12 mm · Material: Steel · Surface: gas nitrided · Color: graphite colors · Thread type: MF11x1 (fine pitch thread) · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Width across flats: 15 mm
CHF 7.90
swiing® revival spacer sleeve front wheel axle 12.2x16x11 | Pony Cross 521, GTX 521 (P8361)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 12.2 mm · Nominal diameter inside: 12 mm · Ø outside: 16 mm · Total length: 11 mm · Pony OEM number: P8361
CHF 5.90
swiing® revival nut M11x1 x 6 SW17 wheel nut galvanized
Height: 6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF11x1 (fine pitch thread) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Width across flats: 17 mm
CHF 3.50
swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm
CHF 39.90
swiing® ingenious wheel axle with bearing conversion kit front wheel cast rim 17" | Pony GTX 521
Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm · Ball bearing closed: Yes
CHF 59.90
swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm
CHF 39.90
Explore categories from Hub & axle
Moped fans also bought
Handlebar fork plate 30 cm curved with chrome strut
Ø outside: 22 mm · Width: 680 mm · Height: 270 mm · Manufacturer: Made in Germany · Material: Steel · Color: Chrome · Surface: chrome-plated · Fork plate holder length: 90 mm · Clamping diameter: 22 mm · Length handlebar ends: 155 mm · Crossbar: Yes · Ø Strut: 14 mm · Mounting type: Fork plate · Strut length: 280 mm
CHF 36.90
swiing® revival front wheel axle set | Pony Cross 521
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Ø shaft: 10.25 mm · Total length: 154 mm · Thread length: 63 mm · Shank length: 27 mm · Ball bearing closed: No · Ø ball [inch] / [mm]: 1/4" (6.35 mm)
CHF 34.90
swiing® revival rear wheel axle set | Pony GTX 521
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1.25 (fine pitch thread) · Ø shaft: 11.95 mm · Total length: 175 mm · Thread length: 21 mm · Shank length: 133 mm · Ball bearing closed: Yes
CHF 42.90
swiing® ingenious wheel axle to bearing conversion kit front wheel 17" | Pony GTX 521
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 145 mm
CHF 39.90
swiing® ingenious wheel axle for bearing conversion kit front wheel 16" | Pony Cross 521
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Thread type: MF11x1 (fine pitch thread) · Total length: 154 mm
CHF 39.90
Working late? Evening hours on Thursday until 20:00
