Single fork spring for your Piaggio Si Europe, Si PTT, Bravo 2 and Bravo 3 (Super-Bravo) as well as Boxer BTV1 and BTV2 moped / moped.
This is the reinforced spring from the Piaggio Si PTT model with a wire diameter of 4 mm. Springs with a wire diameter of 3.5 mm were installed ex works on the other models listed.
Ø wire: 4 mm
Ø outer: 36 mm
Ø inner: 28 mm
Total length: 170 mm
Surface: raw, polished
Price per piece.
Note: The fork spring does not fit the Piaggio Si Montecarlo with telescopic fork or the first Bravo model with spoke wheels and rear light on the mudguard.
Wearing parts as well as complete forks for your Piaggio SI can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 122624
| Manufacturer | swiing® revival parts |
| Material | Spring steel |
| Surface | raw |
| Ø inside | 28 mm |
| Ø outside | 36 mm |
| Ø wire | 4 mm |
| Total length | 170 mm |
| Piaggio OEM number | 122624 |
| Piaggio | Si Bravo / Super Bravo Boxer |
Ratings
Accessories & related products
Corteco oil seal fork NBR 25.7/35/9 B DUO original | Piaggio SI, Bravo, Boxer
Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 25.7 mm · Manufacturer: Corteco · Material: NBR · Ø outside: 35 mm · Width: 7 mm · Width: 9 mm · Temperature resistance (min.): -30 - 100 °C · Piaggio OEM number: 123196 · Piaggio OEM number: 269888
CHF 7.90
swiing® revival steerer tube nut M27.5x1 open | Piaggio SI Europe, Boxer
Ø inside: 22.3 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Nut type: Hexagon nut · Drive: External hexagon · Height: 19 mm · Thread type: MF27.5x1 (fine pitch thread) · Width across flats: 36 mm · Piaggio OEM number: 184431, 122650
CHF 14.90
EBR fork black | Piaggio SI
Manufacturer: EWC · Material: Steel · Color: Chrome · Color: black · Surface: chrome-plated · Surface: varnished · Adjustable: No · Spar end distance (center-center): 139 mm · Ø outer head tube: 27.9 mm · Ø head tube inside: 22 mm · Ø spars: 28 mm · Thread type: MF27.5x1 (fine pitch thread) · Thread length: 58 mm · Head tube length: 173 mm · Fork bridge - center wheel axle: 408 mm · Distance brake cam to wheel axle center-center: 62 mm · Total length: 675 mm
CHF 204.90
Explore categories from Fork
Moped fans also bought
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Contents: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Workshop accessories
CHF 14.70
CHF 73.50/l
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Color: black · Manufacturer: SITO · Mounting type: Welded lug · Material: Steel · Surface: varnished · Ø Silencer: 70 mm · Ø Internal connection: 22.3 mm · Total length: 720 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Ø outside: 14 mm · Flame tube attachment: Plug connection clamped · Number of fixing points: 1 pcs
CHF 79.90
swiing® revival 16" front fender primed | Piaggio SI
Color: black · Manufacturer: swiing® revival parts · Mounting type: Nuts & bolts · Material: Steel · Surface: primed · Wheel size: 16 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Piaggio OEM number: 267651
CHF 34.90
Corteco oil seal fork NBR 25.7/35/9 B DUO original | Piaggio SI, Bravo, Boxer
Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Ø inside: 25.7 mm · Manufacturer: Corteco · Material: NBR · Ø outside: 35 mm · Width: 7 mm · Width: 9 mm · Temperature resistance (min.): -30 - 100 °C · Piaggio OEM number: 123196 · Piaggio OEM number: 269888
CHF 7.90
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Ø inside: 11.25 mm · Ø inside: 15 mm · Manufacturer: SKF · Ball bearing closed: Yes · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Total length: 53.5 mm · Width: 9 mm
CHF 29.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
