Front, black primed steel mudguard for your Piaggio Si moped / moped with 16" rims.
All original holes are provided for mounting the mudguard.
The three holes on the right-hand side of the mudguard are provided for mounting the original cable routing.
Two holes are also provided for attaching the original splash guard flap or mudguard flap at the lower end.
Shape: part-round
Width of mudguard profile (A): 90 mm
Height of mudguard profile (B): 33 mm
End: folded open on both sides
Material: steel, primed black
Total height from support surface to top edge (C): 190 mm
Total length over ends (D): 550 mm
Circumference (E): 705 mm
The mudguard is only primed, meaning there may be slight scratches.
Other parts for your wheel fairing, such as paint polish or fastening material, can be found under accessories.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 267651
Details
| Surface | primed |
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Wheel size [inch] | 16 " |
| Folding the ends | open folded |
| Shape of the mudguard | partly round |
| Total length over ends | 550 mm |
| Mounting type | Nuts & bolts |
| Scope | 705 mm |
| Wide mudguard profile | 90 mm |
| Height of mudguard profile | 33 mm |
| Color | black |
| Total height from support surface to top edge | 190 mm |
| Piaggio OEM number | 267651 |
Suitable for the following models
| Piaggio | Si |
Accessories & related products
swiing® revival 16" front fender chrome | Piaggio SI
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Wheel size [inch]: 16 " · Folding the ends: not folded · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 550 mm · Scope: 705 mm · Wide mudguard profile: 90 mm · Height of mudguard profile: 33 mm · Total height from support surface to top edge: 190 mm · Mounting type: Nuts & bolts
CHF 59.90
GESIPA pop rivet splash guard | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 4 mm · Ø External head: 8 mm · Manufacturer: GESIPA · Rivet pin length: 8 mm · Clamping range: 4 - 5 mm · Material: Aluminum · Material: Steel · Surface: galvanized (blue) · Alternative version of the Piaggio OEM number: 018020
CHF 0.90
Moped fans like you also bought:
Stand set | Piaggio SI, Grillo
Surface: varnished · Manufacturer: Made in Italy · Material: Steel · Stand base - center mount (A): 225 mm · Total width of stand base (B): 220 mm · Wide receptacle (C): 89 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 20 mm · Color: black · Total height: 265 mm
CHF 24.90
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: right · Spare tube shape: straight · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
CHF 12.50
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm · Color: black
CHF 19.90
Tail light black | Piaggio SI
Manufacturer: Made in Italy · Material: Plastic · Tension: 6 V · Tension: 12 V · Bulb holder: Soffit pear · Mounting type: Nuts & bolts · Test mark: none · Color: black · Color: red · Number of fixing points: 1 pcs · Brake light: No · Battery operated: No · Reflectors: Yes · Depth: 65 mm · Width: 100 mm · Height: 78 mm
CHF 21.30
Collection only possible with online purchase and appointment.
