Choke lever for attachment to the left brake lever on your moped, moped or small motorcycle.
The decompression lever with slotted mount is attached to older grip units (e.g. Magura) with a clamping screw and nut.
Figure 3 & 4 shows the mounted decompression lever and is for illustrative purposes only.
You can find the clamping nipple for attaching the cable that matches the decompression lever, throttle grips and other starter lever versions in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Color | white |
| Place of use | left |
| Universal |
| Puch |
| Sachs |
| Zündapp Belmondo |
Ratings
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Screw head: Lens head · Thread length: 4 mm
CHF 2.00
Magura deco / clutch lever black
Ø inside: 22 mm · Total length: 94 mm · Manufacturer: Magura · Material: Plastic · Material: Steel · Surface: burnished · Housing material: Steel · Color: black · Material lever: Plastic · Thread type: M5x0.8 (standard thread) · Number of fixing points: 2 pcs · Mounting type: Screws
CHF 49.90
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
CHF 2.40
swiing® revival decorative lever slotted mount left black (Magura)
Total length: 50 mm · Manufacturer: swiing® revival parts · Material: Plastic · Material: Sheet metal (steel) · Surface: galvanized (blue) · Surface: raw · Color: black · Thickness: 1.2 mm · Height: 19.6 mm · Place of use: left
CHF 24.90
Explore categories from Handles & fittings
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Drive: Slot · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Number of components: 2 pcs · Ø outside: 5 mm · Thread type: M4x0.7 (standard thread) · Screw head: Lens head · Thread length: 4 mm
CHF 2.00
Speedometer 60 km/h Ø 48 mm black / chrome
Manufacturer: Made in Germany · Material: Metal · Material: Plastic · Color: Chrome · Color: black · Surface: chrome-plated · Color: red · Color: white · Maximum speed: 60 Km/h · Lighting: Light slit · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Ø Receptacle: 48 mm · Ø outside: 50.4 mm · Thread type: MF10x1 (fine pitch thread) · Depth: 50 mm · Total height: 70 mm
CHF 59.90
Decompressor cable Ø 1.5 mm x 180 cm (pear-shaped nipple)
Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Ø nipple: 3.3 mm · Ø nipple: 5 mm · Nipple length: 7 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 1800 mm · Area of application: Standard · Pony OEM number: P0919
CHF 2.40
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Thickness: 0.4 mm · Manufacturer: swiing® revival parts · Number of fixing points: 16 pcs · Material: Sealing paper · Color: sand-colored · Width: 170 mm · Total length: 250 mm · Number of components: 1 pcs · Ø inside: 86 mm · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
CHF 5.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
