High-quality deco cable (inner cable) suitable for various mopeds, mopeds and small motorcycles.
This starter cable was also used on motorcycles such as Puch, Puch Maxi, Sachs, Hercules, Pony, Zündapp, etc..
Ø decolitz: 1.5 mm
Cable length: 1.8 m (= 180 cm)
Ø nipple: 3 / 5 mm
Nipple length: 7 mm
A quality product made in Germany.
| Ø nipple | 3.3 mm, 5 mm |
| Manufacturer | Made in Germany |
| Surface | galvanized (blue) |
| Material | Steel |
| Ø Stranded wire | 1.5 mm |
| Cable length | 1800 mm |
| Nipple shape | Pears |
| Nipple length | 7 mm |
| Area of application | Standard |
| Pony OEM number | P0919 |
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | |
| Piaggio | |
| Zündapp Belmondo |
Accessories & related products
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Surface: nickel-plated · Ø outside: 5 mm · Material: Brass · Material: Steel · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Drive: Slot · Number of components: 2 pcs
CHF 2.00
swiing® revival washer slotted decompressor cable Inox | Puch Maxi S / N
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 3 mm · Nominal diameter inside: 3 mm · Thickness: 1.4 mm · Ø inside: 3.8 mm · Ø outside: 12 mm · Area of application: Original · Area of application: Standard · Puch OEM number: 349.1.67.005.1
CHF 3.90
Motorex Spray Intact 200 ml
Manufacturer: Motorex · Contents: 200 ml · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Workshop accessories
CHF 14.70
CHF 73.50/l
Explore categories from Cable pulls & accessories
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
CHF 2.40
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Nipple length: 10 mm · Area of application: Standard · Number of components: 1 pcs
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Surface: nickel-plated · Ø outside: 5 mm · Material: Brass · Material: Steel · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Screw head: Lens head · Thread length: 4 mm · Thread type: M4x0.7 (standard thread) · Drive: Slot · Number of components: 2 pcs
CHF 2.00
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.2 mm · Cable length: 2000 mm · Nipple shape: Barrel (transverse) · Nipple length: 5.5 mm · Material: Brass · Material: Steel · Area of application: Standard
CHF 3.40
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Cable length: 2250 mm · Nipple shape: Pears · Nipple length: 10 mm · Area of application: Standard · Piaggio OEM number: 270460
CHF 2.40
Not in stock
Magura cable clamp Sachs shift/clutch arm
Manufacturer: Magura · Thread type: M4x0.7 (standard thread) · Surface: galvanized (blue) · Surface: nickel-plated · Number of components: 2 pcs · Material: Brass · Material: Steel · Ø Cable bushing: 2.8 mm · Drive: External hexagon · Drive: Slot · Thread length: 7 mm · Total length: 11 mm · Screw head: Hexagon · Ø shaft: 4 mm · Width across flats: 6 mm · Ø Bundle: 7 mm · Ø outside: 7 mm
CHF 2.50
Working late? Evening hours on Thursday until 20:00
