
Polished stainless steel cable duct for your Piaggio Ciao moped / moped.
The cable tunnel with moustache was fitted ex works on the PX model from 1992 and the C24 from 1999, but also fits earlier P and SC spoke wheel models without any problems.
The additionally attached clamps ensure smooth cable routing and prevent the cable sleeves from getting jammed between the steering stop and fork.
The accuracy of fit is excellent and the workmanship extremely high quality. All edges and corners are rounded so that your cables are not damaged.
You can find suitable screws for fastening, paint for painting or chrome steel polish in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Original Piaggio spare part number: 813377
Alternative to the original Piaggio spare part number: 8133775, 148419
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Width | 53 mm, 80 mm |
| Color | Chrome |
| Total length | 305 mm, 285 mm |
| Number of fixing points | 2 pcs |
| Ø mounting hole | 4 mm |
| Piaggio OEM number | 813377 |
| Alternative version of the Piaggio OEM number | 8133775, 148419 |
| Piaggio | Ciao - P , SC , PX , C24 |
Accessories & related products
Autosol stainless steel polish 75 ml
Manufacturer: Autosol · Material to be used: Chrome steel (colloquially known as stainless steel) · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Signal word: Attention · Contents: 75 ml · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry
CHF 10.90
CHF 145.33/l
DUPLI-COLOR acrylic paint RAL 9005 black glossy 400 ml
Temperature resistance (min.): 0 - 80 °C · Manufacturer: DUPLI-COLOR · Lacquer type: Acrylic lacquer · Color: black · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Contents: 400 ml · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish
CHF 16.90
CHF 42.25/l
DUPLI-COLOR Acrylic paint RAL 3020 red glossy 400 ml
Temperature resistance (min.): 0 - 80 °C · Manufacturer: DUPLI-COLOR · Lacquer type: Acrylic lacquer · Color: red · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Contents: 400 ml · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Paint & varnish
CHF 16.90
CHF 42.25/l
Explore categories from Formwork & frame parts
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
CHF 9.90
swiing® revival rear fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Wheel size: 16 " · Wheel size: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Mounting type: Nuts & bolts · Total length over ends: 510 mm · Scope: 620 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 159 mm · Piaggio OEM number: 576135
CHF 34.90
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
CHF 19.90
swiing® revival front fender Inox | Piaggio Ciao
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Wheel size: 16 " · Wheel size: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Mounting type: Nuts & bolts · Total length over ends: 510 mm · Scope: 640 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 162 mm · Piaggio OEM number: 274184
CHF 34.90
swiing® revival screw set engine mounting Inox | Piaggio Ciao, SI, Bravo, Boxer
Drive: External hexagon · Storage method: Sack · Manufacturer: swiing® revival parts · Storage box dimension [mm]: 120 x 110 x 10 · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Number of components: 10 pcs · Screw head: Hexagon · Shank: Yes · Thread type: M6x1 (standard thread) · Thread length: 19 mm · Thread length: 25 mm · Width across flats: 10 mm · Area of application: Standard · Piaggio OEM number: 006176 · Piaggio OEM number: 008977 · Piaggio OEM number: 020106 · Piaggio OEM number: 031092
CHF 10.90
swiing® revival clamping screw rear brake | Piaggio Ciao, SI, Bravo, Boxer
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Ø shaft: 10.5 mm · Ø Cable bushing: 2.1 mm · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Total length: 21.5 mm · Thread length: 11 mm · Width across flats: 11 mm · Width across flats: 14 mm · Alternative version of the Piaggio OEM number: 154533
CHF 5.80









