Intake air restrictor with Ø 11 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is also minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | anodized |
| Carburetor type | SRE |
| Ø Passage | 11 mm |
| Ø outside | 15 mm |
| Color | black |
Ratings
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 62 · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
CHF 64.90
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Width: 50 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
CHF 79.90
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRE · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Width: 50 mm · Ø Air filter connection: 20 mm · Height: 95 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
CHF 79.90
swiing® ingenious intake restrictor Ø 10.5 mm carburetor Bing SRE 15 mm
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRF · Ø Passage: 10.5 mm · Ø outside: 15 mm
CHF 7.80
CHF 5.90
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Surface: anodized · Carburetor type: SRE · Total length: 17 mm · Ø Passage: 12 mm
CHF 7.80
Moped fans also bought
Rectangular rear light (ULO replica) Budget
Material: Plastic · Color: black · Color: red · Width: 65 mm · Bulb holder: BA9s · Test mark: none · Ø Receptacle: 3.5 mm · Depth: 55 mm · Mounting type: Nuts & bolts · Battery operated: No · Number of fixing points: 1 pcs · Brake light: No · Reflectors: Yes · Pony OEM number: P777 · Puch OEM number: 321.1.55.100.0
CHF 9.50
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø inside: 9 mm · Length spring hook: 19 mm · Length spring hook: 53 mm · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Material: Spring steel · Surface: galvanized (blue) · Ø outside: 14 mm · Total length: 122 mm
CHF 2.70
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Material: Metal · Material: Rubber · Color: Chrome · Color: black · Filter type: Grille · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Ø Internal connection: 20 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Ø outside: 61 mm · Total length: 113 mm · Camouflaged: No · Area of application: Tuning
CHF 12.90
swiing® ingenious intake restrictor Ø 10.5 mm carburetor Bing SRE 15 mm
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRF · Ø Passage: 10.5 mm · Ø outside: 15 mm
CHF 7.80
CHF 5.90
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Surface: anodized · Carburetor type: SRE · Total length: 17 mm · Ø Passage: 12 mm
CHF 7.80
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Nominal diameter: 15 mm · Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Place of use: Admission · Thickness: 4 mm · Ø screw holder: 6.2 mm · Hole spacing inlet: 38 mm
CHF 7.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
