Special tool for loosening freewheels.
Made from solid, gas-nitrided hardened steel.
Who hasn't experienced this problem: the freewheel is stuck and cannot be loosened even with the greatest effort.
With this professional tool, this is a thing of the past.
The tool is slid over the wheel axle and the two cams are placed in the groove in the freewheel. The wheel nut is now turned onto the wheel axle so that the tool is pressed against the freewheel.
Now the freewheel can be released with little effort using a fork wrench. As soon as it is attached, the wheel nut must be removed from the axle again.
This narrow version is suitable for ESJOT brand freewheel clutches, among others.
Ø Bore for wheel axle: 12.2 mm
Width of pins: 4 mm
Width of key: 21 mm
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | Hardened |
| Width across flats SW | 21 mm |
| Area of application | Special tool |
| Ø outside | 40 mm |
Suitable for the following models
| Universal | |
| Puch | |
| Sachs | |
| Pony / Cilo (Beta 521 & 512) |
Accessories & related products
Motorex chain spray Road 500 ml
Manufacturer: Motorex · Oil type: fully synthetic · Contents [ml]: 500 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Road use
CHF 21.90
CHF 43.80/l
Motorex Chain Cleaner Spray 500 ml
Manufacturer: Motorex · Contents [ml]: 500 ml · Area of application: Chemistry · Area of application: Cleaner · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment
CHF 19.90
CHF 39.80/l
Motorex Chain Lube chain spray 56 ml (for on the road)
Manufacturer: Motorex · Oil type: fully synthetic · Contents [ml]: 56 ml · Hazard warning: Causes skin irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: Pressurized container: may burst when heated · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Area of application: Road use
CHF 10.90
CHF 194.64/l
ESJOT freewheel 16 - 23 teeth (1A quality)
Chain pitch: 1/2" x 1/8" · Manufacturer: ESJOT · Material: Steel · Thread type: FG34.8 (1.37" 24G) · Surface: Hardened · Number of teeth: 16 pcs · Number of teeth: 18 pcs · Number of teeth: 20 pcs · Number of teeth: 23 pcs · Color: silver · Thickness: 15 mm
CHF 14.90
Moped fans like you also bought:
Motorex Automatic Motor Oil (ATF) 450 ml
Temperature resistance (min.): -45 - 200 °C · Manufacturer: Motorex · Area of application: Gearbox lubrication with clutch · Oil type: ATF Dextron 3 (DEXIII) · Contents [ml]: 450 ml · Gearbox type: Automatic machine · Pony spare part no.: A2080 · Sachs spare part no.: 0263 014 002
CHF 9.90
CHF 22.00/l
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Total length: 185 mm · Manufacturer: swiing® revival parts · Material: Steel · Ø shaft: 11.9 mm · Shank length: 100 mm · Thread type: MF12x1 (fine pitch thread) · Surface: blue galvanized · Width across flats SW: 19 mm · Thread length: 26 mm · Thread length: 52.5 mm · Ø outside: 11.8 mm
CHF 14.90
swiing® ingenious rear wheel axle Ø 29 mm conversion kit with ball bearings | Puch
Manufacturer: swiing® ingenious parts · Thread length: 29 mm · Thread length: 53 mm · Thread type: MF12x1 (fine pitch thread) · Diameter: 29 mm · Material: Steel · Ø shaft: 19 mm · Surface: blue galvanized · Shank length: 100 mm · Total length: 190 mm · Ø inside: 12 mm · Width across flats SW: 19 mm · Ball bearing closed: Yes · Ø outside: 29 mm
CHF 38.90
Collection only possible with online purchase and appointment.
