Special holding tool that simplifies work on the clutch or the ignition on your moped, moped and small motorcycle.
The matching bolt is pushed into the upper connecting rod eye and the plastic plate is used to cover the opening to the engine housing. When working on the flywheel, the bolt will then rest cleanly on the plate and the nut can be loosened and tightened without any problems.
The second picture serves to illustrate this.
With this simple tool, you save yourself the purchase of various different counterholders and have the right assembly tool to hand for all engines.
Alternative counterholders can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Plastic |
| Number of components | 4 pcs |
| Diameter | 10 mm, 12 mm, 15 mm |
Accessories & related products
GPO piston stopper M14x1.25
Manufacturer: GPO · Total length: 83 mm · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Area of application: Special tool · Width across flats SW: 17 mm
CHF 9.50
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Total length: 290 mm · Height: 80 mm · Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Ø outside: 93 mm · Number of components: 1 pcs · Ø inside: 27 mm · Area of application: Special tool · Diameter: 19 mm · Ø Pin: 8 mm
CHF 47.90
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Drive: External hexagon · Drive: Slot · Manufacturer: Magura · Total length: 15 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Ø outside: 8 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Area of application: Standard · Width across flats SW: 7 mm · Thread length: 7 mm
CHF 2.50
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: Airsal · Number of fixing points: 4 pcs · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Ø cylinder neck: 48 mm · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Area of application: Tuning · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
CHF 99.90
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Total length: 1600 mm · Total length: 2200 mm · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 9.90
Cable set E50 engine automatic black | Puch Maxi S / N
Total length: 1600 mm · Total length: 2200 mm · Color: black · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 19.50
swiing® revival rear brake anchor plate | Puch Maxi N
Material: Steel · Surface: galvanized (blue) · Total length: 135 mm · Manufacturer: swiing® revival parts · Ø outside: 92 mm · Ø axle: 12 mm · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
CHF 74.90
Collection only possible with online purchase and appointment.
