Centring bushes made of aluminium, red anodized, for clean mounting of the cylinder cover on Puch Maxi S / N, Puch X30 NS / NL, Puch X30 N-2AH mopeds / mopeds.
The bushes can be used on all Puch cylinder heads in conjunction with conventional M6 threaded studs.
They are pushed into the holes in the cylinder cover so that they protrude slightly above the sealing surface (see Figure 2 for illustration).
We recommend that you glue the guide bushes into the cylinder head with Loctite adhesive so that they do not move during assembly/disassembly.
Now the cylinder head can be pushed perfectly centered onto the stud bolts.
You can find the corresponding cylinder heads, stud bolts, cylinder head gaskets, Loctite, etc. in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | anodized |
| Nominal diameter inside | 6 mm |
| Ø outside | 7.4 mm |
| Ø inside | 6.25 mm |
| Total length | 15 mm |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Standard
CHF 32.90
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Material: Aluminum · Surface: sandblasted · Manufacturer: GPO · Camouflaged: Yes · Area of application: Tuning · Ø cylinder: 45 mm · Total length: 135 mm · Height: 55 mm · Candle thread: short · Width: 125 mm · Decompressor: No · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs
CHF 32.90
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Temperature resistance (min.): -75 - 150 °C · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Type of application: 1K · Color: green · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m · Area of application: Chemistry
CHF 21.90
CHF 2’190.00/l
GPO 38 mm cylinder head Puch original (Maxi S, N | X30 NS, NL, N-2AH) black
Surface: varnished · Manufacturer: GPO · Material: Aluminum · Area of application: Original · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 38 mm · Decompressor: No · Number of fixing points: 4 pcs
CHF 42.90
GPO 45 mm cylinder head tuning black | Puch Maxi S, N, X30 NS, NL, N-2AH
Surface: varnished · Manufacturer: GPO · Camouflaged: Yes · Material: Aluminum · Area of application: Tuning · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 45 mm · Decompressor: No · Number of fixing points: 4 pcs
CHF 42.90
Moped fans also bought
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Area of application: Standard
CHF 32.90
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Width across flats SW: 10 mm · Total length: 106 mm · Surface: galvanized (blue) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
CHF 7.40
GPO 44 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Surface: sandblasted · Ø cylinder: 44 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Decompressor: No
CHF 42.90
Collection only possible with online purchase and appointment.
