High-quality Ø 90x17 mm brake pads with return tension spring suitable for various front wheel rims of old Sachs mopeds / mopeds.
The racing brake pads are made from a special magnesium-aluminum alloy and are particularly suitable for drum brakes in the high-end tuning sector due to their high braking force. In tests, this new type of pad compound has resulted in around 20% more braking force than conventional brake pads.
| Width | 17 mm |
| Manufacturer | swiing® ingenious parts |
| Number of springs | 1 pcs |
| Color | red |
| Springs included | Yes |
| Area of application | High End |
| Ø drum | 90 mm |
| Sachs |
| Zündapp Belmondo |
Ratings
Accessories & related products
Eurol copper grease 100 g
Temperature resistance (min.): -40 - 1100 °C · Manufacturer: Eurol · Contents: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Area of application: Fat
CHF 11.90
CHF 119.00/kg
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Contents: 750 ml · Area of application: Chemistry · Area of application: Cleaner · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 33.20/l
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Steel · Surface: galvanized (blue) · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Thread length: 30 mm · Area of application: Special tool
CHF 16.50
Explore categories from Drum brake
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard
CHF 2.40
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Area of application: Standard
CHF 2.40
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
CHF 10.90
CHF 24.22/l
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Color: sand-colored · Thickness: 0.35 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Total length: 200 mm · Width: 130 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
CHF 5.40
Hot
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing type: Deep groove ball bearing · Stock number: E15 · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Bearing cage: Sheet steel cage ball-guided · Material: Steel · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Area of application: High End · Area of application: Standard · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
CHF 49.90
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
