High-quality Ø 80x18 mm brake pads for the front and rear drum brakes of the Grimeca brand on your moped, moped and small motorcycle.
The racing brake pads are made of a special magnesium-aluminum alloy and are particularly suitable for drum brakes in the high-end tuning sector due to their high braking force. In tests, this new type of pad compound has shown around 20% more braking force than conventional brake pads.
Ø Drum: 80 mm
Brake shoe width: 18 mm
Brake cable: tension spring 1 piece (not included)
Due to their uncompromising braking force, these brake pads are primarily used in racing.
Alternative brake pads, matching springs and appropriate cleaning agents and lubricants can be found in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Ø drum | 80 mm |
| Area of application | High End |
| Springs included | No |
| Width | 18 mm |
| Number of springs | 1 pcs |
| Color | red |
Accessories & related products
Eurol copper grease 100 g
Manufacturer: Eurol · Area of application: Chemistry · Area of application: Fat · Contents: 100 g · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Hazard warning: Very toxic to aquatic organisms · Signal word: Danger · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Temperature resistance (min.): -40 - 1100 °C
CHF 11.90
CHF 119.00/kg
Motorex Brake Cleaner 750 ml
Manufacturer: Motorex · Area of application: Chemistry · Area of application: Cleaner · Contents: 750 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Extremely flammable aerosol · Hazard warning: May be fatal if swallowed and enters the respiratory tract · Hazard warning: May cause drowsiness and dizziness · Hazard warning: Pressurized container: may burst when heated · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Danger · Hazard pictogram: GHS02 - Highly flammable · Hazard pictogram: GHS04 - Gas under pressure · Hazard pictogram: GHS07 - Caution dangerous
CHF 24.90
CHF 33.20/l
Explore categories from Drum brake
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Total length: 6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
swiing® revival wheel axle LELEU & Grimeca wheel hub cast wheel rear | Puch
Thread type: MF12x1 (fine pitch thread) · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 185 mm · Ø shaft: 11.9 mm · Ø outside: 11.8 mm · Shank length: 100 mm · Thread length: 26 mm · Thread length: 52.5 mm · Width across flats: 19 mm
CHF 14.90
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
CHF 9.90
swiing® ingenious assembly tool clasp brake shoe
Thread type: M6x1 (standard thread) · Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Number of components: 3 pcs · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Thread length: 30 mm · Width across flats: 8 mm
CHF 16.50
Working late? Evening hours on Thursday until 20:00
