
Flat Hella (replica) rear light with brake light function and chrome-plated housing suitable for your Monark moped / moped or for universal use.
The rear light is attached to the mudguard using the two enclosed M5 screws. Two BA9s bulbs for operation are already included in the socket.
Cable assignment:
Ground: gray
Rücklight: green
High-quality BA9s bulbs and suitable connection material for this tail light can be found in the accessories section.
| Material | Chrome steel (colloquially known as stainless steel), Plastic |
| Tension | 6 V, 12 V |
| Color | Chrome |
| Bulb holder | BA9s |
| Width | 72 mm |
| Depth | 77 mm |
| Height | 145 mm |
| Brake light | Yes |
| Battery operated | No |
| Test mark | E1 |
| Reflectors | Yes |
| Mounting type | Nuts & bolts |
| Number of fixing points | 2 pcs |
| Universal |
| Monark |
Accessories & related products
swiing® revival 19" rear mudguard "Classic" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Wheel size: 19 " · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 1165 mm · Scope: 1160 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Total height from support surface to top edge: 390 mm · Mounting type: Nuts & bolts
CHF 87.90
swiing® revival 17" rear fender "Oldie" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Color: Chrome · Surface: polished · Wheel size: 17 " · Folding the ends: open folded · Shape of the mudguard: partly round · Total length over ends: 620 mm · Scope: 1000 mm · Wide mudguard profile: 76 mm · Height of mudguard profile: 29 mm · Total height from support surface to top edge: 320 mm · Mounting type: Nuts & bolts
CHF 77.90
Protective conduit for cable Ø 5 / 10 / 15 mm (per meter) black
Ø inside: 5 mm · Ø inside: 10 mm · Ø inside: 15 mm · Ø outside: 6 mm · Ø outside: 11.5 mm · Ø outside: 16 mm · Total length: 1000 mm · Manufacturer: Made in Germany · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Area of application: Standard
CHF 2.40
Cable coupling 2-phase
Cable cross-section: 0.3 mm² · Cable cross-section: 0 - 0.7 mm · Number of components: 1 pcs · Number of connections: 2 pcs · Area of application: Standard · Material: Plastic · Material: Sheet metal (steel) · Color: black · Color: transparent · Width: 9.7 mm · Height: 6.2 mm · Clamping diameter: 2 mm · Total length: 21.8 mm
CHF 1.00
Explore categories from Electrics & light
Moped fans also bought
swiing® revival side protection screw set chrome | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Color: Chrome · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Surface: chrome-plated · Surface: galvanized (blue) · Total length: 48 mm · Total length: 63 mm · Thread length: 35 mm · Thread length: 50 mm
CHF 14.90
GUIA light switch black (3 switch positions)
Manufacturer: GUIA · Material: Plastic · Housing material: Steel · Substructure material: Steel · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Color: black · Number of positions: 3 pcs · Ø Handlebars: 22 mm
CHF 14.70
GPO LED retro oval rear light (battery)
Manufacturer: GPO · Material: Plastic · Material: Steel · Color: Chrome · Color: red · Bulb holder: LED (permanently installed) · Width: 30 mm · Depth: 55 mm · Height: 60 mm · Mounting type: Nuts & bolts · Brake light: No · Battery operated: Yes · Number of fixing points: 1 pcs · Reflectors: Yes · Test mark: none
CHF 32.90
Rear light "Hella" large brake light chrome
Test mark: E1 · Color: orange · Color: red · Color: silver · Bulb holder: BA9s · Brake light: Yes · Reflectors: Yes · Battery operated: No · Width: 75 mm · Height: 146 mm · Depth: 56 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 64.90










