Rear mudguard made of stainless steel for various mopeds with 19-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded on both sides, there are no sharp edges, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: partially round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 40 mm
End: folded closed on both sides
Material: Chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 390 mm
Total length over ends (D): 670 mm
Circumference (E): 1165 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Folding the ends | closed folded |
| Shape of the mudguard | partly round |
| Total length over ends | 1165 mm |
| Scope | 1160 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 40 mm |
| Total height from support surface to top edge | 390 mm |
| Mounting type | Nuts & bolts |
| Wheel size | 19 " |
Ratings
Accessories & related products
Autosol stainless steel polish 75 ml
Manufacturer: Autosol · Material to be used: Chrome steel (colloquially known as stainless steel) · Contents: 75 ml · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry
CHF 10.90
CHF 145.33/l
swiing® revival 19" front mudguard "Classic" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 615 mm · Scope: 785 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 210 mm · Wheel size: 19 "
CHF 59.90
swiing® revival 17" front fender "Classic" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 565 mm · Scope: 705 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 184 mm · Wheel size: 17 "
CHF 54.90
swiing® revival 17" rear fender "Classic" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 633 mm · Scope: 1015 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 330 mm · Wheel size: 17 "
CHF 77.90
Motorex high gloss chrome polish 200 ml
Manufacturer: Motorex · Material to be used: Chrome steel (colloquially known as stainless steel) · Contents: 200 ml · Hazard warning: Flammable liquid and vapor · Signal word: Attention · Hazard pictogram: GHS02 - Highly flammable · Area of application: Chemistry
CHF 14.90
CHF 74.50/l
CEV rear light Typo 854 NOS
Manufacturer: CEV · Test mark: E3 · Material: Plastic · Bulb holder: Soffit pear · Color: red · Width: 50 mm · Height: 100 mm · Mounting type: Nuts & bolts · Depth: 40 mm · Brake light: No · Reflectors: Yes · Battery operated: No · Number of fixing points: 1 pcs
CHF 79.90
Taillight (original) | Puch Velux X30
Material: Plastic · Test mark: none · Bulb holder: E10 · Color: gray · Color: red · Ø Receptacle: 3 mm · Width: 35 mm · Height: 75 mm · Mounting type: Nuts & bolts · Depth: 80 mm · Brake light: No · Reflectors: Yes · Battery operated: No · Number of fixing points: 1 pcs
CHF 47.90
Not in stock
GPO rear light Classic chrome with base
Manufacturer: GPO · Material: Aluminum · Test mark: none · Bulb holder: BAY15d · Color: Chrome · Color: red · Ø Receptacle: 5 mm · Tension: 6 V · Width: 60 mm · Height: 100 mm · Number of fixing points: 2 pcs · Mounting type: Nuts & bolts · Depth: 60 mm · Brake light: Yes · Reflectors: Yes · Battery operated: No
CHF 47.90
swiing® revival rear light (ULO)
Manufacturer: swiing® revival parts · Material: Plastic · Test mark: none · Bulb holder: BA9s · Color: red · Ø Receptacle: 4 mm · Width: 65 mm · Height: 50 mm · Number of fixing points: 1 pcs · Mounting type: Nuts & bolts · Depth: 60 mm · Brake light: No · Reflectors: Yes · Battery operated: No
CHF 19.90
Mudguard strut 19" chrome
Ø mounting hole: 5.5 mm · Ø mounting hole: 10.9 mm · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Total length: 355 mm · Color: Chrome · Distance mudguard - center hole: 342 mm · Wide intake: 75 mm · Wheel size: 19 " · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs
CHF 12.90
Not in stock
Hot 
Rear light ULO | Sachs, Puch
Material: Aluminum · Material: Steel · Test mark: none · Ø Receptacle: 5 mm · Tension: 6 V · Bulb holder: E10 · Color: Chrome · Color: red · Width: 57 mm · Height: 90 mm · Depth: 55 mm · Brake light: No · Reflectors: Yes · Battery operated: No · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
CHF 58.90
Not in stock
Explore categories from Mudguard
Moped fans also bought
- 12 %
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 3.94 mm · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm
CHF 12.50
CHF 10.90
Continental 2.00 - 2.50 x 19" tube
Manufacturer: Continental · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 25.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Old designation: 23 x 2 " · Old designation: 23 x 2.25 " · Old designation: 23 x 2.5 " · Valve type: TR6 car valve · Wheel size: 19 "
CHF 15.50
swiing® revival 19" front mudguard "Classic" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 615 mm · Scope: 785 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 40 mm · Mounting type: Nuts & bolts · Total height from support surface to top edge: 210 mm · Wheel size: 19 "
CHF 59.90
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 2200 mm
CHF 9.90
Manual cable set black
Material: Steel · Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 2200 mm · Color: black
CHF 19.90
Mudguard strut 19" chrome
Ø mounting hole: 5.5 mm · Ø mounting hole: 10.9 mm · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Total length: 355 mm · Color: Chrome · Distance mudguard - center hole: 342 mm · Wide intake: 75 mm · Wheel size: 19 " · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs
CHF 12.90
Not in stock
Collection only possible with online purchase and appointment.
