Original second-generation Sachs coaster-brake rear hub with a die-cast zinc housing, compatible with Swiss mopeds equipped with Sachs 504 HG engines and 17-inch rims.
If the sprocket is replaced, the hub can also be used on Puch X30 Sport models.
The 50-tooth sprocket is riveted and can be replaced.
The coaster brake hub is shipped without a brake anchor plate. The wheel axle, including all internal components, is included.
Note: New coaster hubs must be installed by a qualified technician in accordance with the relevant factory documentation. Bearing play must be checked after installing the brake anchor plate and readjusted if necessary. You’ll find our tutorial on this below. Improper handling and any resulting damage do not constitute grounds for a warranty claim.
Additional hub bodies, an alternative sprocket, and matching screws, as well as a brake pad and maintenance kits, can be found in the accessories section.
NOS – New Old Stock.
| Manufacturer | Sachs |
| Surface | galvanized (blue), chrome-plated |
| Ø axle | 10.5 mm |
| Area of application | Original |
| Ø drum | 90 mm |
| Thread type | MF10.5x1 (fine pitch thread) |
| Ø bolt circle | 105.5 mm |
| Number of spoke holes | 36 pcs |
| Sachs |
Accessories & related products
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 175 mm · Thread length: 34 mm · Thread length: 45 mm · Ø shaft: 10.5 mm · Shank length: 95.6 mm · Thread type: MF10.5x1 (fine pitch thread)
CHF 23.90
Not in stock
swiing® revival screw set for sprocket mounting coaster brake
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Number of components: 12 pcs · Color: gray · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Shank: No · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Width across flats: 10 mm
CHF 19.90
ESJOT Gear Ring, 50 Teeth, Reverse, Galvanized
Chain type: 415H · Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø inside: 94 mm · Chain pitch: 1/2" x 3/16" · Number of teeth: 50 pcs · Ø bolt circle: 105.5 mm · Thickness: 4.3 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.4 mm
CHF 64.90
Coaster hub with sprocket 37 T. NOS | Zündapp Belmondo / Hercules
Manufacturer: Sachs · Material: Aluminum · Area of application: Original · Material: Steel · Surface: chrome-plated · Surface: galvanized (blue) · Ø bolt circle: 105.5 mm · Ø axle: 10.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Ø drum: 90 mm · Number of spoke holes: 36 pcs
CHF 699.90
Rear Hub with 50-Tooth Sprocket for 17" NOS | Sachs 504 HG
Manufacturer: Sachs · Area of application: Original · Surface: chrome-plated · Surface: galvanized (blue) · Ø bolt circle: 105.5 mm · Ø axle: 10.5 mm · Ø drum: 90 mm · Thread type: MF10.5x1 (fine pitch thread) · Number of spoke holes: 36 pcs
CHF 699.90
Explore categories from Hub & axle
Moped fans also bought
Hot 
Wippermann drive chain No.18 (double reinforced)
Ø bore: 4.2 mm · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 114 pcs · Chain type: 415H · Chain lock type: Spring lock · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1448 mm · Ø Pin: 4.15 mm
CHF 33.90
ESJOT Gear Ring, 40 Teeth, Reverse, Galvanized
Manufacturer: ESJOT · Material: Steel · Surface: galvanized (blue) · Color: silver · Chain type: 415H · Ø inside: 94 mm · Chain pitch: 1/2" x 3/16" · Number of teeth: 40 pcs · Ø mounting hole: 6.5 mm · Thickness: 4.2 mm · Hole spacing: 74 mm · Number of fixing points: 4 pcs · Ø bolt circle: 105.5 mm
CHF 49.90
swiing® ingenious screw set for sprocket mounting coaster brake racing
Manufacturer: swiing® ingenious parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: gray · Color: silver · Number of components: 12 pcs · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats: 8 mm · Width across flats: 10 mm · Shank: No · Nominal diameter (thread): 6 mm · Thread length: 18 mm
CHF 19.90
hünersdorff fuel can "Fuel Friend" 0.5 L transparent with filler neck
Manufacturer: hünersdorff · Area of application: Road use · Material: Polyethylene (PE) · Surface: raw · Color: red · Color: transparent · Capacity: 500 ml · Mass display: Liter · Width: 95 mm · Height: 130 mm · Height: 180 mm · Depth: 60 mm
CHF 17.90
Working late? Evening hours on Thursday until 20:00
