Black racing handlebars in carbon look with bolted crossbar for your moped, moped and small motorcycle. The aluminum handlebar is mounted on the fork plate.
Both balance ends are slightly bent backwards, the left handlebar end is also knurled for additional grip. This extra-wide design gives you maximum control even at high speeds.
Height: 80 mm
Width: 820 mm
Ø tube: 22 mm
Length handlebar ends (for grip mounting): 235 mm
Length fork plate mount: 140 mm
Matching attachments such as clamps, steerer nuts, grips, etc. can be found in the accessories
.| Material | Aluminum |
| Color | Carbon |
| Fork plate holder length | 140 mm |
| Ø outside | 22 mm |
| Width | 820 mm |
| Mounting type | Fork plate |
| Height | 80 mm |
| Clamping diameter | 22 mm |
| Length handlebar ends | 235 mm |
| Crossbar | Yes |
| Ø Strut | 12 mm |
| Strut length | 240 mm |
Accessories & related products
swiing® revival steerer tube nut M26x1 closed fork plate Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Height: 14 mm · Drive: External hexagon · Ø outside: 36.6 mm · Thread type: MF26x1 (fine pitch thread) · Nominal diameter (thread): 26 mm · Width across flats: 30 mm
CHF 18.90
Explore categories from Handlebar & stem
Moped fans also bought
Hot 
swiing® ingenious exhaust 22 mm camouflaged 2-piece | Puch Maxi S, N
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Color: Chrome · Total length: 910 mm · Ø Silencer: 54.5 mm · Ø outside: 59 mm · Mounting type: Stud bolts & nuts · Mounting type: Welded lug · Number of fixing points: 4 pcs · Ø Flame tube outside: 22 mm · Exhaust type: Flute · Flame tube attachment: Flange
CHF 134.90
Not so nice 
15 mm intake manifold | Puch E50
Area of application: Tuning · Camouflaged: Yes · Material: Aluminum · Ø inside: 14.5 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total height: 54 mm · Height flange center hole: 43 mm · Mounting type: Screws · Total length: 47 mm · Number of fixing points: 2 pcs
CHF 11.90
Hot
GPO Gear Ring 45 T, Black | Puch Maxi, X30 NG-2AH
Chain type: 415H · Ø inside: 94 mm · Thickness: 4.5 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Chain pitch: 1/2" x 3/16" · Number of teeth: 45 pcs · Ø bolt circle: 105.5 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm
CHF 24.90
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44
CHF 9.90
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
CHF 2.40
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Ø nipple: 8 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Number of components: 1 pcs · Nipple length: 12 mm
CHF 2.40
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Polyvinyl chloride (PVC) · Color: black · Color: white · Place of use: Frame (+ tank) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Height: 26 mm · Height: 60 mm · Height: 65 mm · Consistency: UV-resistant · Consistency: petrol resistant · Rear side texture: Adhesive · Transferfolie: No
CHF 9.40
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
CHF 2.00
Working late? Evening hours on Thursday until 20:00
