
Digital CDI with two completely freely programmable ignition curves, suitable for racing or cross use with your moped, moped or small motorcycle.
This CDI unit allows you to freely program two individual ignition curves, each within a range of 0 to 40 degrees. Depending on the requirements and track conditions, for example, the first end curve can be set for narrow and difficult terrain and the second end curve for fast straights and long bends.
| Manufacturer | PVL |
| Material | Plastic |
| Color | black |
| Total length | 53 mm |
| Height | 26 mm |
| Width | 44 mm |
| Ø mounting hole | 6.6 mm |
| Area of application | Tuning, Racing |
| Number of fixing points | 1 pcs |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) |
Accessories & related products
PVL Stator "1037" Digital ignition
Manufacturer: PVL · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Color: black · Ø bolt circle: 82 mm · Cable length: 800 mm · Number of cables: 2 pcs · Ø outside: 90 mm · Ø outside: 100 mm · Number of fixing points: 3 pcs · Area of application: Racing · Area of application: Tuning
CHF 98.90
PVL ignition coil "466101" Digital
Manufacturer: PVL · Color: black · Cable length: 120 mm · Cable length: 420 mm · Total length: 66 mm · Height: 65 mm · Place of use: Ignition · Hole spacing: 23 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Area of application: Racing · Area of application: Tuning
CHF 98.90
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Surface: galvanized (blue) · Nipple length: 5 mm
CHF 2.40
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Total length: 6 mm · Screw head: Lens head · Drive: Slot · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
CHF 2.00
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Ø Air filter connection: 49 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection · Area of application: Tuning
CHF 149.90
Not in stock
PVL Stator "1037" Digital ignition
Manufacturer: PVL · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Color: black · Ø bolt circle: 82 mm · Cable length: 800 mm · Number of cables: 2 pcs · Ø outside: 90 mm · Ø outside: 100 mm · Number of fixing points: 3 pcs · Area of application: Racing · Area of application: Tuning
CHF 98.90
PVL ignition coil "466101" Digital
Manufacturer: PVL · Color: black · Cable length: 120 mm · Cable length: 420 mm · Total length: 66 mm · Height: 65 mm · Place of use: Ignition · Hole spacing: 23 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Area of application: Racing · Area of application: Tuning
CHF 98.90
PVL internal rotor ignition left & right digital
Manufacturer: PVL · Material: Aluminum · Material: Copper · Material: Plastic · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø mounting plate: 100 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning
CHF 439.90






