High-quality 21 mm CP carburetor kit with clamp connection for your moped, moped and small motorcycle.
The set was designed by Polini for the Puch Maxi S, N moped / moped models with E50 engine, but can also be used universally for countless other makes and models.
During the development of the CP models, special emphasis was placed on size and weight, making this carburetor particularly compact and around 40% lighter than conventional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This should simplify the tuning of the carburetor and enable high performance with low consumption. In addition, all CP carburetors have an oil and vacuum connection.
| Manufacturer | Polini |
| Material | Aluminum |
| Component group Carburetor | Carburetor complete |
| Carburetor type | CP |
| Nominal diameter | 21 mm |
| Ø fuel hose connection | 6 mm |
| Ø without reducing sleeve | 25 mm |
| Mounting type | Plug connection |
| Ø Internal connection | 24 mm |
| Ø Air filter connection | 46 mm |
| Area of application | Tuning |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Choke control | Cable choke |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 100 |
| Size of secondary nozzle | 40 |
| Puch |
Ratings
Accessories & related products
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Ø fuel hose connection: 6 mm · Mounting type: Plug connection · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning
CHF 149.90
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
CHF 39.90
Polini jet set (140 - 158) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 140 · Nozzle size: 142 · Nozzle size: 144 · Nozzle size: 146 · Nozzle size: 148 · Nozzle size: 150 · Nozzle size: 152 · Nozzle size: 154 · Nozzle size: 156 · Nozzle size: 158
CHF 39.90
Polini 26 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Carburetor type: Flat slide valve · Nominal diameter: 26 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 26 mm · Total length: 83 mm · Ø Output inside: 26 mm · Height: 155 mm · Ø Air filter connection: 49 mm · Width: 65 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 105 · Size of secondary nozzle: 45
CHF 144.90
Polini 32 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Carburetor type: Flat slide valve · Nominal diameter: 32 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 32 mm · Total length: 83 mm · Ø Output inside: 32 mm · Height: 155 mm · Ø Air filter connection: 55 mm · Width: 78 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 122 · Size of secondary nozzle: 42
CHF 189.90
Polini racing exhaust "for race" blanco | Puch Maxi, X30
Manufacturer: Polini · Material: Steel · Surface: blank · Total length: 900 mm · Ø Silencer: 60 mm · Exhaust type: Cone / double cone · Number of fixing points: 2 pcs · Flame tube attachment: Flange · Flame tube attachment: suspended
CHF 369.90
Moped fans also bought
GPO 45 mm cylinder kit (large ribs) | Puch
Nominal diameter: 45 mm · Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø outlet inside: 24.6 mm · Inlet window: 21.8 x 14.6 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
CHF 99.90
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated · Total length: 28 mm · Ø inside: 4.8 mm · Number of components: 3 pcs · Ø outside: 8.3 mm
CHF 17.90
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54
CHF 15.90
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Surface: sandblasted · Ø cylinder: 45 mm · Width: 125 mm · Height: 55 mm · Total length: 135 mm · Number of fixing points: 4 pcs · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
CHF 32.90
Athena 45 mm cylinder kit 70 ccm camouflaged | Puch
Nominal diameter: 45 mm · Manufacturer: Athena · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 23.5 mm · Inlet window: 22.3 x 14 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
CHF 158.90
Polini jet set (120 - 138) main jets long version CP, Keihin, Koso, PWK
Manufacturer: Polini · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: CP · Carburetor type: Coso · Carburetor type: Keihin · Carburetor type: PWK · Drive: External hexagon · Nozzle type: Main nozzle · Nozzle size: 120 · Nozzle size: 122 · Nozzle size: 124 · Nozzle size: 126 · Nozzle size: 128 · Nozzle size: 130 · Nozzle size: 132 · Nozzle size: 134 · Nozzle size: 136 · Nozzle size: 138
CHF 39.90
GPO 12 mm intake manifold Puch X30 NG-2AH
Ø inside: 12 mm · Manufacturer: GPO · Material: Aluminum · Total length: 53 mm · Mounting type: Screws · Hole spacing inlet: 32 - 38 mm · Total height: 63 mm · Height flange center hole: 52.5 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Camouflaged: No · Area of application: Original
CHF 39.90
swiing® ingenious clutch springs reinforced (+50%) | Puch E50
Spring design: Pressure spring · Ø wire: 2 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Surface: coated · Color: red · Total length: 26.6 mm · Ø outside: 8.45 mm · Ø inside: 4.3 mm · Number of components: 3 pcs · Area of application: Tuning
CHF 17.90
Collection only possible with online purchase and appointment.
