Polini has placed particular emphasis on size and weight in the development of the CP model; this carburetor is therefore particularly compact and around 40% lighter than traditional carburetors.
Due to the compact design, the intake path is very short. Unique is the concentric design of the passage, i.e. a circular passage instead of an oval one as with most other carburettors - a geometry that optimizes the air flow. Modifications to the mixing tube and the use of a larger needle ensure better atomization of the gas mixture.
This is intended to simplify carburetor tuning and enable high performance with low consumption. All CP carburetors have an oil and vacuum connection.
Inlet connection diameter: 24 or 26 mm if the bushes are removed.
Connection diameter of air filter: 46 mm
Main nozzle size: 56
Side nozzle size: 38
Choke is located directly on the carburetor and must be operated by hand.
Special Polini nozzles must be used.
Quality product from the Italian manufacturer Polini.
| Nominal diameter | 15 mm |
| Manufacturer | Polini |
| Component group Carburetor | Carburetor complete |
| Area of application | Tuning |
| Carburetor type | CP |
| Choke control | Hand choke |
| Ø fuel hose connection | 6 mm |
| Nozzle thread | M5x0.8 (standard thread) |
| Nozzle size | 56 |
| Ø without reducing sleeve | 26 mm |
| Ø Air filter connection | 46 mm |
| Ø Internal connection | 24 mm |
| Mixed oil connection | Yes |
| Vacuum connection | Yes |
| Mounting type | Plug connection clamped |
| Size of secondary nozzle | 38 |
Ratings
Moped fans also bought
Polini 43.5 mm cylinder kit reed | Puch
Nominal diameter: 43.5 mm · Manufacturer: Polini · Material: Aluminum · Camouflaged: No · Surface: Nickel silicon carbide (known as Nikasil®) · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø cylinder neck: 48 mm · Ø outlet inside: 22 mm · Hole spacing inlet: 32 mm · Hole spacing inlet: 39 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 26 x 21 · Thread inlet: M5x0.8 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Area of application: Racing · Area of application: Tuning
CHF 324.90
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Length spring hook: 19 mm · Length spring hook: 53 mm · Material: Spring steel · Surface: galvanized (blue) · Ø inside: 9 mm · Ø outside: 14 mm · Total length: 122 mm
CHF 2.70
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Number of components: 10 pcs · Area of application: Standard
CHF 19.90
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
CHF 9.90
CHF 22.00/l
EBR telescopic fork aluminum (Harry) silver | Puch
Manufacturer: EWC · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: varnished · Thread type: MF26x1 (fine pitch thread) · Adjustable: Yes · Color: Chrome · Color: silver · Spar end distance (center-center): 150 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Ø spars: 30 mm · Head tube length: 200 mm · Fork bridge - center wheel axle: 458 mm · Thread length: 57 mm · Total length: 705 mm
CHF 244.90
Collection only possible with online purchase and appointment.
