Shaft seal ring 22x35x6 mm for use on the gearbox of your Piaggio Ciao C9 moped / moped with splined gearbox (Mono and Vario).
This shaft seal ring (colloquially known as a radial shaft seal) is fitted in the gearbox on the brake pad side.
Ø inner: 22 mm
Ø outer: 35 mm
Width: 6 mm
Material: NBR
Temperature-resistant: -30 to +100 °C, briefly up to 120 °C
Type: A - With rubberized outer casing and a sealing lip.
Please note that all Piaggio models after the Ciao C9 with rigid fork no longer had a splined gearbox fitted as standard. For this reason, these transmissions require a shaft seal with the dimensions 30x20x5 mm on the brake side.
You can find this oil seal and other parts for your Piaggio transmission in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 008752
| Shaft seal type | A - With rubberized outer part / one sealing lip. |
| Manufacturer | Piaggio |
| Material | NBR |
| Surface | rubberized |
| Width | 6 mm |
| Ø outside | 35 mm |
| Ø inside | 22 mm |
| Temperature resistance (min.) | -30 - 100 °C |
| Piaggio | Ciao - P , SC , PX , C24 Si Bravo / Super Bravo Boxer Grillo |
Ratings
Accessories & related products
Triangular bearing plate galvanized | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: Made in Italy · Area of application: Original · Material: Steel · Surface: galvanized (blue) · Ø axle: 15 mm · Thread type: M10x1.5 (standard thread) · Width: 99 mm · Total length: 17.5 mm · Number of fixing points: 2 pcs · Thread length: 13 mm · Piaggio OEM number: 124963
CHF 19.90
swiing® ingenious triangular bearing plate Racing aluminium red anodized | Piaggio Ciao, SI, Bravo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Racing · Area of application: Tuning · Surface: anodized · Color: red · Ø axle: 15 mm · Thread type: M10x1.5 (standard thread) · Width: 101 mm · Total length: 13 mm · Number of fixing points: 2 pcs · Thread length: 13 mm · Alternative version of the Piaggio OEM number: 124963
CHF 37.90
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 20 mm · Ø outside: 30 mm · Width: 5 mm
CHF 5.90
Malossi SAE 75W-90 gear oil "RACING" 250 ml
Manufacturer: Malossi · Viscosity (SAE): 75W-90 · Oil type: GL4 · Oil type: fully synthetic · Contents: 250 ml · Gearbox type: Automatic machine · Gearbox type: Mono · Gearbox type: Vario · Area of application: Gearbox lubrication without clutch
CHF 9.90
CHF 39.60/l
Malossi SAE 80W-90 gear oil "SPORT" 250 ml
Manufacturer: Malossi · Viscosity (SAE): 80W-90 · Oil type: GL4 · Oil type: GL5 · Contents: 250 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Gearbox type: Mono · Gearbox type: Vario · Area of application: Gearbox lubrication without clutch
CHF 8.90
CHF 35.60/l
Explore categories from Drive & transmission
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
CHF 9.90
Oil seal NBR 17/25/4 A Gearbox Mono original | Piaggio Ciao, SI, Bravo, Boxer
Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø outside: 25 mm · Width: 4 mm · Ø inside: 17 mm · Temperature resistance (min.): -30 - 100 °C
CHF 5.90
CUBE 6202 2RS ball bearing 15/35/11
Bearing cage: Sheet steel cage ball-guided · Inner ring width: 11 mm · Manufacturer: CUBE · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Stock number: 6202 · Bearing type: Deep groove ball bearing · Ø outside: 35 mm · Ø inside: 15 mm · Width: 11 mm · Ball bearing closed: Yes
CHF 4.70
CUBE 6202 2RS ball bearing 15/35/11 triangular bearing plate | Piaggio Ciao, SI, Bravo, Grillo
Bearing type: Deep groove ball bearing · Stock number: 6202 · Ø inside: 15 mm · Ø outside: 35 mm · Width: 11 mm · Manufacturer: CUBE · Ball bearing closed: Yes · Dust protection type: 2RS - NBR contact seal on both sides
CHF 4.70
Collection only possible with online purchase and appointment.
