High-quality oil seal (colloquially known as a radial shaft seal) 20x30x5 mm for use on the mono or vario gearbox of your Piaggio Ciao, Si, Bravo, Boxer moped / moped.
This radial shaft seal is fitted in the gearbox on the brake pad side.
Note: If you own the first Ciao model C9 with rigid fork and a splined gearbox, you must install a 22x35x6 mm seal ring on the brake side.
You can find this oil seal and other transmission parts in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 131511
| Temperature resistance (min.) | -30 - 100 °C |
| Shaft seal type | A - With rubberized outer part / one sealing lip. |
| Ø inside | 20 mm |
| Ø outside | 30 mm |
| Manufacturer | Made in Italy |
| Material | NBR |
| Surface | rubberized |
| Place of use | Gear hub |
| Width | 5 mm |
| Piaggio OEM number | 131511 |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo Gilera CBA Gilera Citta |
Ratings
Accessories & related products
Loctite 638 Joining shaft-hub high-strength 10 ml
Temperature resistance (min.): -75 - 150 °C · Color: green · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
CHF 21.90
CHF 2’190.00/l
Oil seal NBR 20/30/5 A Gearbox original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 20 mm · Ø outside: 30 mm · Width: 5 mm
CHF 5.90
GPO oil seal set engine & gearbox (mono) | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 120 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Shaft seal type: B - With sheet metal outer casing / one sealing lip. · Manufacturer: GPO · Ø inside: 15 mm · Ø inside: 16 mm · Ø inside: 17 mm · Ø inside: 20 mm · Ø outside: 22 mm · Ø outside: 24 mm · Ø outside: 25 mm · Ø outside: 30 mm · Width: 3 mm · Width: 4 mm · Width: 5 mm · Place of use: Clutch · Place of use: Crankshaft · Place of use: Gear hub · Place of use: Gearbox cover · Material: NBR · Area of application: Original · Area of application: Standard
CHF 16.90
Moped fans also bought
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Ø outside: 18 mm · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Height: 26 mm · Ø mounting hole: 4.4 mm · Total height: 31 mm · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939
CHF 11.90
Oil seal 13/22/4 A NBR gearbox Vario original | Piaggio Ciao, SI, Bravo, Boxer
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Surface: rubberized · Ø inside: 13 mm · Ø outside: 22 mm · Width: 4 mm · Piaggio OEM number: 240222
CHF 4.70
swiing® ingenious axle swing arm set | Piaggio Ciao
Manufacturer: swiing® ingenious parts · Ø outside: 16 mm · Ø outside: 22 mm · Material: Brass · Material: Chrome steel (colloquially known as stainless steel) · Thread type: M8x1.25 (standard thread) · Color: gold · Total length: 50 mm · Drive: External hexagon · Ø Bearing inside: 12.85 mm · Thread length: 22 mm
CHF 29.90
Oil seal NBR 17/25/4 A Gearbox Mono | Piaggio Ciao, SI, Bravo, Boxer
Place of use: Gearbox cover · Temperature resistance (min.): -30 - 100 °C · Shaft seal type: A - With rubberized outer part / one sealing lip. · Ø inside: 17 mm · Ø outside: 25 mm · Width: 4 mm · Manufacturer: Made in Italy · Material: NBR · Surface: rubberized · Piaggio OEM number: 114469
CHF 5.50
Collection only possible with online purchase and appointment.
